20V MAKERX 6pc Ultimate Crafting Tool Combo Kit

WX739L.9 TECHNICAL SPECIFICATIONS

WX741L.9 TECHNICAL SPECIFICATIONS

WX742L.9 TECHNICAL SPECIFICATIONS

WX743L.9 TECHNICAL SPECIFICATIONS

Product Number 2 TECHNICAL SPECIFICATIONS

WA7231 TECHNICAL SPECIFICATIONS

Both models adapt 20V battery power for the MAKERX crafting tools. The HubX includes a USB charging outlet and belt clip.

Any Worx 20V Power Share battery will work with the HubX.

The cord reaching from the HubX to the MAKERX tools is 4 ft. long.

No, the HubX is strictly designed to power the MAKERX series of crafting tools, along with a 20V Power Share battery.

The USB port outputs 5V 2A.

The USB Light requires a minimum input of 5V-Max 80MA min. using a USB Type-A connection. It will work with most computers and similar devices.

The Air Brush can be used with any liquid suitable for Air Brush use. Make sure it is cleaned thoroughly after each use.

Yes.

Yes. Other woodburning and soldering tips can be attached to this tool.

If the Wood & Metal Crafter is not moved for about 5 minutes, the temperature will drop to 400° F. If the tool remains motionless for another 10 minutes, it will shut off altogether.

Yes, see the operator’s manual for instructions about changing between Fahrenheit and Celsius scales.

On a fully charged 2.0Ah battery, the Wood & Metal Crafter will stay hot for about 1 hour of continuous use.

A fully charged 1.5Ah battery will power the Heat Gun for about 10 minutes of continuous use.

The Mini Heat Gun blows hot air consistently at about 500 degrees. It is not adjustable.

The MAKERX Rotary tool ships with a 1/8 in. collet, and can use any standard collet on the market.

The MAKERX Rotary Tool accepts all standard rotary tool accessories, provided the proper collet is in place.

These recommendations will help maximize the performance of your tool, and achieve the best results.

• Do not subject the tool or accessory to heavy load. Use light, constant pressure. Pushing harder typically does not improve the removal rate or performance. Be patient and let the tool work as designed.
• Allow the tool to reach target rotation speed before engaging the workpiece. Use the fastest rotation possible while still achieving desired results. Typically, tougher materials require faster rotation speeds.
• Clamp the workpiece whenever possible. A moving workpiece is more likely to create a pinching or binding situation. When using a cutting wheel, keep the wheel straight in the cut. If the wheel is twisted, it will tend to grab and climb out of the cut. The tool will shut off in an effort to prevent this situation, which is called kickback.
• If the tool does stop suddenly, press the power button to turn it off. Remove the accessory from the workpiece. Turn the tool back on and allow the rotation to build to the target speed. This may take between 1.5 to 3 seconds. Resume the work gradually. If cutting, take care to follow the cut path already established. Do not twist or bend the blade.

The ¼ in. arbor adapter allows the grinder to use Dremel EZ-Lock wheels.

These recommendations will help maximize the performance of your tool, and achieve the best results.

• Do not subject the tool or accessory to a heavy load. Use light, constant pressure. Pushing harder typically does not improve the removal rate or performance. Be patient and let the tool work as designed.
• Allow the tool to reach the target rotation speed before engaging the workpiece. Use the fastest rotation possible while still achieving desired results. Typically, tougher materials require faster rotation speeds.
• Clamp the workpiece whenever possible. A moving workpiece is more likely to create a pinching or binding situation. When using a cutting wheel, keep the wheel straight in the cut. If the wheel is twisted, it will tend to grab and climb out of the cut. The tool will shut off in an effort to prevent this situation, which is called kickback. Note: The MAKERX Grinder is designed to help the user make straight cuts. The tool body and wheel are lined up. When held, the user’s forearm and hand are lined up with the blade and tool. Pull the Grinder and wheel through the cut, in line with the hand and forearm.
• If the tool does stop suddenly, press the power button to turn it off. Remove the accessory from the workpiece. Turn the tool back on and allow the rotation to build to the target speed. This may take between 1.5 to 3 seconds. Resume the work gradually. If cutting, take care to follow the cut path already established. Do not twist or bend the blade.