40V GT 3.0 Trimmer & TURBINE Blower Combo Kit

ITEM WG925

Versatility for all of your yard care needs


40V Li-ion Cordless 2-pc Combo Kit includes WG180 and WG580 with 2 batteries

12" 40-Volt Li-ion Cordless Grass Trimmer/Edger w/ (2) 40V Li-ion batteries for longer run time.

Telescopic shaft adjusts to user’s height and posture for quick adjustments in the yard

The rubberized twin wheel set supports and guides the edger for straight cuts

Innovative Command Feed™ spool system for instant line feeding

High capacity air volume with turbine fan technology (340 CFM)

Hyper-stream air nozzle for extra tough conditions

40V GT 3.0 Trimmer & TURBINE Blower Combo Kit ITEM WG925
$149.99

Availability: Out of stock

WANT TO BE THE FIRST TO KNOW WHEN IT'S BACK IN STOCK? ENTER YOUR EMAIL BELOW:


WORX GT 3.0 String Trimmer & Edger - WG180

Key Features

The WORX GT 3.0 is a lightweight grass trimmer and wheeled edger, featuring two powerful 40V MaxLithium batteries and our innovative Command Feed spool system for instant line feeding. Includes a 3 Year Warranty & 30 Day Money Back Guarantee.

CONVERTS IN SECONDS

The WORX GT 3.0 String Trimmer & Wheeled Edger allows you to work smarter, not harder. The lightweight, cordless grass trimmer features two powerful 40V MaxLithium batteries for extended run time without memory effect or self-discharge. Additionally, the GT 3.0 features a range of intuitive adjustments that adapt to you and your landscape. The rubberized twin wheel set supports and guides your edging for clean lines and professional results, every time.
WORX GT 3.0 Trimmer Edger - WG163
40V WORX GT 3.0 Trimmer Edger - WG163
Tool-free adjustments make the WORX GT 3.0 String Trimmer & Wheeled Edger easy to use for anybody. The head tilts a full 90° to let you quickly and easily trim in those hard-to-reach places, while being fully supported by wheels. It also features our innovative Command Feed spool system for instant line feeding with the push of a button.

POWERFUL TURBINE FAN TECHNOLOGY

The WORX family of TURBINE Blowers takes leaf blowing to a new level. The all-new TURBINE technology delivers forceful, high-capacity air volume to do everything from sweep the driveway and sidewalk after mowing, to piling up those leaves on a fall afternoon. The TURBINE blowers are lightweight, ergonomic and powerful. With three different power options, you can choose which one is right for you and your home.
40V WORX AIR TURBINE Cordless Leaf Blower - WG546
SPECS & MANUALS
TURBINE 40V Technical Specifications
  • Rated Voltage
    40V MAX
  • Air Speed
    60/90 mph
  • Air Volume
    225/340 cfm
  • Charging Time
    ≈5 Hours
  • Machine Weight
    6.3 lbs
  • Warranty
    3 Years
WORX GT Technical Specifications
  • Rated Voltage
    40V MAX
  • No-Load Speed
    7600/min
  • Cutting Diameter
    12"
  • Line Diameter
    0.065"
  • Cutting Line Length
    10'
  • Machine Weight
    5.9 lbs
  • Warranty
    3 Years
WHAT'S INCLUDED
You're Getting
  • (1) - 40V GT 3.0 Trimmer / Edger
  • (2) - 40V MaxLithium Battery
  • (1) - Trimmer Spool
  • (1) - 40V Battery Charger
  • (1) - Support Wheels
  • (1) - Safety Guard
  • (1) - TURBINE 40V Leaf Blower
FAQs

Frequently Asked Questions

  • Does this come with a battery and charger?

    Yes, this model comes with 2 batteries and 1 charger.



  • How heavy are the tools in this kit?

    How heavy are the tools in this kit?


    The TURBINE Leaf Blower only weighs 6.3lbs and even this small amount of weight is optimally distributed to make clean up comfortable and enjoyable while keeping the controls easily accessible.



  • How long can you trim on each 40 Volt Max Lithium battery charge?

    Runtime will vary from job to job, and sometimes between users, depending on how each person works. The included 40 Volt Max Lithium battery will take you twice as far as our 20V (1.5Ah) and is designed to provide your trimmer with enough working time per charge to trim up to the average 1/2 acre yard on one charge. Actual results may vary on a variety of factors, including the density of the grass or weeds you’re cutting or the age of the battery pack.


    To maximize the runtime you get out of the battery when using your blower, use the appropriate speed for the job at hand. Lower speeds are ideal for cleaning off hard surfaces, like driveways, sidewalks, patios, or garages. Faster speeds, ideal for cleaning the leaves out of your grass, use more power to give you the blowing force you need to get the job done. Since most clean up jobs will involve switching between lower and faster speeds, actual runtime results will vary.



  • Is the battery going to be powerful enough?

    Worx lithium batteries are surprisingly powerful for their compact size. Our 40V Max lithium batteries have double the power of our 20V (1.5Ah) batteries. If we trust our 20V batteries to power our professional cordless drills through concrete and large timbers, you can believe the 40V battery included with the hedge trimmer will easily give your bushes, shrubs and other greenery the professionally manicured look you want.



  • Is the battery larger than previous models?

    The 40V GT 3.0 Trimmer and TURBINE Blower Combo kit features our highest capacity battery to date and is slightly larger than previous models. The included 40 Volt Max Lithium Battery has double the run time of the 20V (1.5Ah) Worx battery and can hold twice the amount of energy as previous models.



  • What is the horsepower rating of Worx lithium tools?

    Battery powered DC motors are not rated for horsepower as output power is only measured with gas or induction AC (corded) motors. Worx lithium powered products were designed with sufficient power to get the job done quickly & easily.



  • How long does it take to charge the 40 Volt Max battery?

    It takes about 8 hours to fully charge the included battery with the included charger.



  • Can I use my 40 Volt Max Lithium batteries on my other WORX tools?

    While Share Volt allows you to share batteries between tools within the same voltage family, batteries should only be used with tools of a corresponding voltage. Use your 20V Max Lithium battery with any 20V WORX tool – even the power tools – but save your 40V battery for your 40V tools.



  • What is CommandFeed and how do I use it?

    Worx GT has a history of changing the game when it comes to feeding trimming line, and the 40V GT 3.0 String Trimmer / Edger is no exception. Bumping to advance the line became a thing of the past with auto-feeding line on the first GT, and now, CommandFeed puts the control at your fingertips. If at any time, you need more line for your trimmer, just press the CommandFeed button to release more line. You’ll get the perfect amount of line without stopping your work or getting your hands dirty. It’s that easy.



  • Are lithium batteries interchangeable with the Ni-Cad?

    Our lithium tools and Ni-Cd tools are separate platforms and are not interchangeable. Lithium batteries offer our customers maintenance-free technology without the hassle of managing the memory effect inherent in Ni-Cad batteries.



  • Does it come pre-assembled?

    Each trimmer comes with some minor assembly required, which may take up to 5 minutes per tool. A step-by-step instruction manual is included along with easy assembly instructions. Please have a #2 Phillips head screwdriver on hand when assembling your GT.



  • Once I put the TURBINE together, can I disassemble it?

    Yes, you can disassemble the TURBINE after you’ve put it together. Press the convenient clip on the left side of the TURBINE nozzle to release the nozzle. Hold this down and pull the nozzle straight away from the motor. Separating the motor and nozzle makes the tool more compact for transport or easy storage in tight spaces.


    If you need to further disassemble the nozzle, find the small, rectangular shape with rounded corners near the seam of the two nozzle pieces. Press down hard on this space while pushing the seam against a hard surface. It is difficult to separate but can be done if necessary.



  • What is CommandFeed and how do I use it?

    Worx GT has a history of changing the game when it comes to feeding trimming line. Bumping to advance the line became a thing of the past with auto-feeding line on the first GT, and now, CommandFeed puts the control at your fingertips. If at any time, you need more line for your trimmer, just press the CommandFeed button to release more line. You’ll get the perfect amount of line without stopping your work or getting your hands dirty. It’s that easy.



  • How do I adjust the Auxiliary Handle?

    You can adjust the angle of the auxiliary handle as easily as pushing a button. Where the handle meets the shaft of the GT, there’s an orange button. Push the button and move the handle to the desired position. Release the button to lock it in place.



  • How do I adjust the length of the GT?

    On the shaft of the trimmer is a black locking collar with an orange clip. Open the orange clip and slide the handle and cutting head apart to desired length. Close the orange clip to secure the trimmer shaft.



  • How do I adjust the angle of the cutting head?

    Place the trimmer head on the floor and put your foot on the cutting head. Lift or lower the handle to your preferred angle while stabilizing the head on the ground. The 40V Worx GT 3.0 String Trimmer / Edger will click through the positions. Once you’ve found the perfect angle for you, you’re ready to get back at it!



  • How do I convert the GT from Trimmer to Edger?

    Converting your trimmer from Trimmer to Edger is quick and easy.


    To turn the cutting head for edging mode, look for the black locking collar and orange clip on the shaft of the trimmer. Open the orange clip and twist the shaft/handle. For trimming, twist the handle so it is perpendicular to the cutting head. For edging, twist the handle parallel to the cutting head. When the handle is in the desired position, close the orange clip.



  • How does I convert the trimmer to mini mower mode?

    This model does not have a mini-mower mode.


    Mini mower mode is offered on our 20V GT Revolution trimmers.



  • What is the horsepower rating of these tools? How powerful is the TURBINE blower?

    Horsepower rating is more accurately used to describe gas-powered tools. These tools are powered by a 40V battery which is twice as powerful as our previous 20V batteries. You can depend on the power they provide. With a max airflow of 340cfm, you can be sure the TURBINE has the power to get the job done, whether the job is cleaning up flower beds, sweeping out the garage or drying off your car after washing it.



  • Is this also a vacuum like some of the other electric blowers Worx offers?

    The WG580 does not include a vacuum feature. For a complete 3-in-1 electric leaf blower/vacuum/mulcher, check out the Worx TriVac or TURBINE Fusion.



  • Is the TURBINE Leaf Blower variable speed? How do I change the speed?

    Yes, the WG580 TURBINE Leaf Blower does have a variable speed control. The control is in the perfect position for one-handed operation. To change the speed of the blower, use the orange dial at the front of the handle to go from low to GO!



  • Can other cutting line be used with the 40V GT 3.0 String Trimmer / Edger?

    Our Double Helix line is specially designed to work with the Worx 40V GT 3.0 CommandFeed, and give you a quicker and more efficient cut to help maintain a healthy, professionally groomed lawn. Order additional spools at any time! With each purchase, you get pre-loaded spools with 10 ft of line.


    If you decide to use traditional line, the Worx GT can accept standard 0.065” cutting line found at any garden or home center and can be wound around our empty spool cartridges. Refer to your owner’s manual for important details about how to wind the line on the spools and keep in mind that with conventional cutting line, CommandFeed may not work as expected.



  • Can I use the tool without the safety guard? I have experience with other trimmers and will be the only one using it.

    The safety guard is an essential part of the tool. Not only does it keep you safe from any debris from the trimming/edging, it also helps regulate the length of the cutting line. Without the safety guard, your GT will not operate properly and you are at risk for injury.



  • Are there any precautions I should follow when using the Worx 40V GT 3.0 String Trimmer / Edger?

    Carefully review the owner’s manual for all safety information and guidelines for using the Worx GT 3.0. Follow safety precautions while using any power tools – including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back. See the owner’s manual for complete safety instructions and details.



  • Are there any precautions I should follow when using the Worx 40V GT 3.0 String Trimmer / Edger?

    The Worx TURBINE Leaf Blower is double-insulated to prevent shock, but we recommend that our customers follow standard safety precautions while using our tools, including wearing safety eyewear, gloves, appropriate shoes and clothing, and keeping hair tied back.


    ATTENTION: The back of the motor housing is the air intake for the Worx TURBINE Leaf Blower. Keep all loose clothing, hair and debris away from this area to avoid accident, injury or damage to the tool. Hold the blower at your side and keep the back of the motor housing clear at all times.



  • I’ve misplaced my manual. Is there anywhere I can get more information?

    Download the GT manual here.


    Download the TURBINE blower manual here.



  • What is the guarantee/warranty?

    If you decide the Worx 40V Combo Kit isn’t the right tool for you, we offer a 30-day Money Back Guarantee from date of receipt (less shipping and handling). Please call our customer service center at 1-866-354-9679 (WORX) and we’ll be happy to assist. View more information here.


    We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your GT or blower? Register now!


    Worx batteries are covered by a 1 Year Limited Consumer Warranty and are not eligible for warranty extension.

    Parts subject to normal wear and tear are not covered by the tool’s warranty. View more information on our warranty here.



  • Where can I get replacement parts?

    Lose a spool cap cover? Need an extra battery or charger? Many replacement parts are available online under Accessories.



  • Is the fan in the blower replaceable?

    Because of the positioning of the fan in the tool, the fan is not a part we offer as a replaceable item. Our friendly customer service team will be glad in helping you find the best solution to get you back up and running. Please contact us at 1-866-354-9679 (WORX).



IMPORTANT INFORMATION

Important Information

California proposition 65 WARNING:

This product can expose you to chemicals including lead, phthalate or bisphenol A which are known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands after use. For more information go to www.P65Warnings.ca.gov.

Proposition 65 de la Californie AVERTISSEMENT:

Ce produit peut vous exposer à des produits chimiques, incluant au plomb, au phtalate ou au bisphénol A, qui sont reconnus dans l'État de Californie comme pouvant causer un cancer, des anomalies congénitales ou d'autres dommages à l'appareil reproducteur. Assures-vous de bien vous laver les mains après usage. Pour en savoir plus, veuillez consulter le site www.P65Warnings.ca.gov.

Propuesta de California 65 ADVERTENCIA:

Este producto puede exponerlo a químicos que incluyen plomo, ftalato, o bisfenol A que se sabe en el Estado de California que causan cáncer, defectos de nacimiento u otros daños reproductivos. Lave sus manos después de usarlo. Para más información visite www.P65Warnings.ca.gov.
40V GT 3.0 Trimmer & TURBINE Blower Combo Kit is rated 4.7 out of 5 by 232.
Rated 5 out of 5 by from Excellent Upgrade I've had battery yard tools for several years, most recently with 20V systems. As I get older, it's getting harder to use some of them without strain. I just purchased this combination 40V set and am very pleased. The high speed on the blower is much more effective than my previous tool and is lighter. The adjustable length on the trimmer reduces strain on my back, the optional wheels are great for edging, and replacing the cord spool is a snap compared to my previous tool. And the batteries recharge much quicker!
Date published: 2018-10-14
Rated 5 out of 5 by from I bought this a month ago. Happy I did. They both work great. The only thing is it was 149 dollars amonth ago now I see it's down to 119. Do I get a discount
Date published: 2018-10-13
Rated 5 out of 5 by from Lightweight!! I purchase the blower/trimmer combo last month. Love them both. Very lightweight and easy to use. It came with 2 - 40v batteries that last a long time. Very happy with this purchase.
Date published: 2018-10-13
Rated 5 out of 5 by from Works wonderful I bought this about a month ago and have used it a lot and it performs great every time !
Date published: 2018-09-19
  • y_2018, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_12, tr_220
  • loc_en_US, sid_WG925, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_worx
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 23.02ms
  • REVIEWS, PRODUCT