A cordless chainsaw can be one of the most useful outdoor power tools you can own. They make short work of tasks like removing tree branches and chopping wood.
As useful as a chainsaw is, you will need to maintain the machine. One of the most important tasks as far as maintenance goes is sharpening the chain. Cutting with a dull chain can be a safety hazard, so you need to make sure to keep your chainsaw sharp.
Some people might choose to replace the chain on a chainsaw when it gets dull, but sharpening is a better idea. You can also save time and make the task easier if you sharpen your chainsaw with a rotary tool. For the best rotary tool, check out the MAKERX rotary tool. The design of the Worx MAKERX rotary tool makes it more precise and versatile than competing models.
In this post, we are going to look at how to sharpen a chainsaw. You will learn how to use a rotary tool for this task to sharpen the chain.
Benefits of Chain Sharpening
Safety is the first and most important reason to sharpen your chainsaw chain. A sharper chain cuts better and it is less likely to kick when you cut.
Knowing how to sharpen a chainsaw chain can also save money. Replacement chains cost money. By sharpening the chain on your chainsaw, you can get more use from one chain before it needs to be replaced.
Finally, it will make the work easier. A sharp chainsaw chain will cut with little to no pressure. If the chain is dull, you will need to push it through to cut. This not only puts more work on the mechanical parts of the chainsaw, it makes you work harder.
How to Sharpen a Chainsaw
Some people might choose to sharpen a chainsaw with a file. That said, sharpening a chainsaw is one of the best rotary tool uses. It will get the work done faster and it will be easier to restore the blade.
To do the work, you will need a rotary tool and a thin-diameter grinding stone attachment. If you want to make the work easier, you could get a chainsaw sharpener kit for your rotary tool. The kit will come with the bit and an attachment that holds the tool steady and at an angle.
To start, be sure to wear gloves and eye protection when sharpening a chainsaw. If you are working on a battery-powered chainsaw, remove the battery before you start working on the blade.
- Use a marker to mark the section of chain you are going to sharpen first.
- Turn on the rotary tool and sharpen the first tooth holding the bit at a 30° angle.
- It only takes a few seconds to sharpen each blade so try to sharpen each section for the same amount of time.
- Remember, the teeth alternate in direction so make sure to match the bit to the direction of the tooth.
- Work your way around the chain sharpening each tooth until you get back around to the first one with the mark.
Yard tool maintenance is an important part of keeping your tools working well. Sharpening a chainsaw is not hard and it will go a long way toward maintaining the machine and ensuring that you can get clean, smooth cuts every time you use it.