For a limited time, purchase the WR150 Landroid and get a Free WA0866 “Find My Landoid” GPS Location Anti-Theft device (value $299.99). The GPS will be automatically added to your cart, but will show $0.00 when you check out. The Landroid accessory keeps Landroid constantly connected via cellular data, notifies you via the Landroid mobile app if Landroid has been removed from its mowing area. The GPS also provides real-time notifications and status updates and tracks and lock your Landroid remotely in case of theft.

The Landroid is a battery-powered robotic mower that cuts your grass on a customizable schedule and automatically returns to the recharging base when complete.

The WR150 is designed for effectively manage yards with up to 1/2 of an acre of grass covering. Where as the WR140 model handles 1/4 acre.

Mow time can vary due to several factors including your terrain, slopes, and the number of obstacles it must navigate around in your lawn. The Landroid trims your yard on a customizable schedule, maintaining a consistently healthy lawn height.

Landroid is powered by 1 20V 4.0Ah Power Share Battery.

The Landroid has an app that allows the owner to adjust multiple settings and gather information about your Landroid. It is available at no cost on the Google Play store and Apple App store.

A quick start guide with easy to understand instructions is included with the Landroid. Installtaion takes anywhere from 3 to 5 hours depending on your lawn size and number of obstacles.

Installation of a boundary wire is required before using your Landroid. The boundary wire and lawn stakes are all included with the Landroid. We also offer customer care and support for installation questions.

The charging base should be placed on a completely flat surface. A 32 foot (9.7 m) power cable is included. Place the charging base in an area that doesn’t get an excessive amount of sun exposure to prevent overheating of the lithium battery.

If you have an existing dog fence, the radio frequency from the dog fence could potentially interfere with the radio frequency of the Landroid boundary wire, rendering both fences inoperative. Landroid is not recommended to be installed within 3 feet (1m) of an existing dog fence.

While not necessary, the boundary wire can be trenched. The Landroid wire should not be buried more than 2 inches (5cm). Lawn Stakes are provided in the box to pin the boundary wire flush with the surface of your lawn.

Landroid handles large obstacles by bumping into them and turning around. The Anti-Collision System (ACS) accessory is available as an add-on to help your Landroid sense obstacles via ultrasonic detection and navigate around them instead of running over or bumping into them.

The Landroid can handle inclines of up to 35% (20-degree slope).

The Landroid must have a gate or a path to move through the second cutting area. The Landroid can travel over a driveway to get to the secondary mowing area if needed, but the wires must be run through 2 separate expansion joints in the concrete.

The Landroid mows according to an algorithm which to us appears to be a random pattern. Since Landroid mows more frequently it will create a carpeting effect on your lawn leaving your grass completely even.

3 razor blades attached to a rotating disc.

Cut-to-Edge technology is an offset blade positioned at the edge of the mowing deck. This allows the mower to get closer to the edge of your boundary and reduce the amount of trimming needed to as little as 2 in. (4.5 cm).

Yes, you have the ability to transfer ownership of your Landroid to someone else through the Landroid account page (https://account.worxlandroid.com/login). Follow the steps below to successfully change ownership:

1. Ask the new owner of the Landroid to set up a new Landroid account for themselves
2. Log-in to the https://account.worxlandroid.com webpage and click “change” next to your email address (found under “Owner”
3. Fill out the change of ownership form with the new owner’s email address that they used to set-up their Landroid account
4. You will both get an email confirmation when the transfer is successful

For replacement and additional parts please visit our Landroid Accessories Page

 Yes, you can! We recommend walking the boundary wire to ensure the wire has not been but. If it has been cut, reconnect it using a wire connector. Once you’re done, you’ll need to clamp the wire to your new charging station and complete the setup process.