Snowflake Branch Wall Hanging

snowflake branch hanging from wallsnowflake branch hanging from wall

Step-by-Step Instructions


1. Find a good-sized branch that fits the size of your space and remove any unwanted parts.

2. Use the rotary tool with the drill bit to drill the holes in the branch. Start by drilling two holes towards the outside of the branch equal distance from the edge.

using measure tape to measure stick

3. Drill a hole in the center of the branch and drill two more holes equally spaced from the center.

using drill to drill into stick

4. Cut a long piece of baker's twine and thread it through the furthest hole to the other furthest hole. Tie a knot at each end.

holding stick and threading red and white

5. Tie a piece of baker's twine on each ornament and thread them through the three middle holes. Check the length of each ornament and cut to size, then secure with a knot.

threading red and white through top of snowflake

6. Drill three small holes on the top of the branch for the trees and hot glue in place. Add extra greener by hot-gluing a few sprigs on the back of the branch.

7. Hang and hibernate.

Snowflakes hanging from branch from wall