Nitro 20V Brushless Cordless Jigsaw
Yes, the brushless jigsaw can cut up to 25/64 in. (10mm) of steel.
Yes, this Worx NITRO Brushless Cordless Jigsaw accepts T-Shank blades for professional results.
Plunge cuts can be made into soft materials without a pre-drilled hole. Harder materials require a starter hole with a diameter slightly over the width of the blade.
To make a plunge cut:
- Set the orbital action control lever to 0.
- Make sure nothing below the intended cut area will be damaged.
- Without turning the tool on, place the front edge of the shoe solidly on the workpiece.
- Align the blade with the intended cut line but keep it above the workpiece.
- Using the front edge of the shoe as a pivot, turn on the tool and gradually lower the blade into the workpiece.
- When the shoe is flat against the workpiece, normal cutting may take place.
Orbital action takes the jigsaw blade’s straight sawing movement and adds increasing levels of elliptical motion to it. That motion creates a faster, more aggressive cut the same way it does for a reciprocating saw. With the elliptical motion, sawdust and material chips can clear the teeth more easily and cut through the material faster. In general, a large orbital action (setting 3) should be used with soft materials and a no orbital action (setting 0) should be used with hard materials. When a smooth cut is required, no orbit (0) should be used.
Yes, the WX542L Worx NITRO Brushless Cordless Jigsaw will operate with a 2.0Ah battery and any other Worx 20V Power Share battery.
What is Lorem Ipsum?
What is Lorem Ipsum?
industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It w

Accessorize
Outperforms Traditional Jigsaws


Brushless Motor
Brushless motors are more efficient, run 50% longer, are 25% more powerful, and offer 10% longer life of the tool compared to the motors with a brushed design.


Tool-Free Bevel Base Adjustment
Quick and easy bevel adjustment for 0-45° left or right.


Quick and easy bevel adjustment for 0-45° left or right.
Allows for easy blade changes and use of T-Shank blades from other brands for convenience.