20V Power Share 4-Piece Kit Including Ai Drill, Worxsaw, Reciprocating Saw and Flex Light


More Views

A Combination that can fix anything!

The Ai Drill featers an automated BITLOCK™ tightens around the bit, 30% more holding force than hand-tightening chuck

The Worxsaw weighs only 4.5lbs making it easy to transport and maneuver.

The Saw has a tool-less blade change system for added convenience and a pendulum function for improved cutting efficiency.

As an added bonus you can light up all your jobs in any space with the functional and flexible light.

20V Power Share 4-Piece Kit Including Ai Drill, Worxsaw, Reciprocating Saw and Flex Light ITEM WX947L

Regular Price: $149.99

Special Price $119.99

Availability: Out of stock


Technical Specifications
  • Rated Voltage
    20V MAX
  • No-Load Speed
    0-800 rpm (Drill)
  • No-Load Speed
    0-3500 rpm (Saw)
  • Warranty
    3 Years
You're Getting
  • (1) - 20V Ai Drill
  • (1) - 20V Worxsaw
  • (1) - 20V Reciprocating Saw
  • (1) - Flexible Light
  • (1) - Carrying Bag
  • (1) - 20V Battery Charger
  • (2) - 20V Batteries

Frequently Asked Questions

  • Does this come with a battery?

    Yes, this model includes 2 batteries and one charger.

  • What accessories does this kit include?

    In addition to the WX178L, WX500L, WX523L, and the WX028L tools, this kit includes two 20V Max Lithium batteries, a charger, dual-ended bit, dust extraction adaptor, parallel guide, allen key, reciprocating saw blade and a circular sawblade as well as a tool bag to hold all of it.

  • What are the dimensions of the tool bag?

    The tool bag measures 19.5" long x 8.5" wide x 9" deep.

  • How heavy are the tools included in this kit?

    Power doesn't mean heavy, and that's true for all the tools in the kit. The Ai Drill lets you work smarter, not harder, which means not carrying around extra weight. At less than 3 pounds without the battery installed, the Ai Drill lets you put your muscle where it counts, not in your drill.

    At only 3.2 lbs without the battery installed, the Worx Compact Circular Saw is surprisingly lightweight, but make no mistake, it delivers easy-to-maneuver circular saw power with single-hand control. The reciprocating saw weighs less than 5 pounds before installing the battery.

    The Flexible Worklight only weighs 0.54 pounds without the battery, and that makes it the perfect companion to your toolbox without weighing it down.

  • What makes the WORX Ai Drill unique when compared to other drills?

    The WORX Ai Drill takes your drill to the next level, making it easier for beginners to use and giving professionals an edge. Three features make the Ai Drill more than just your average drill. BitLock is an automated bit tightening that gives you the perfect chuck tension every time, with 30% more holding force than hand-tightening the chuck. SafeDrive stops driven screws flush with the work surface, preventing damage to the work and the screw. No more accidental stripping or over-sinking a screw. Pulse Assist adds bursts of force to help prevent slipping, which means that drilling into hard surfaces and driving or removing soft or worn screws is easier than ever before.

  • I'm just learning to use a drill, what can it do for me?

    The Ai Drill is designed to make using a drill simple. The BitLock chuck opens and closes with a twist of the switch to make installing and removing bits much easier without the hassle of trying to tighten the chuck. Also, the bits are held 30% tighter than average with manual tightening to eliminate the tendency for the chuck to loosen and bits to fall out.

    SafeDrive monitors the screw driving function. When the head of the screw is driven close to the work surface, the driver automatically stops and shifts into Pulse Assist mode for perfect screwdriving results every time without setting a clutch.

    Pulse Assist mode is helpful when trying to start drilling slick surfaces, such as tile or metal, starting screws, and dealing with rusted or difficult to remove screws and nuts. The intermittent surging and slowing of Pulse Assist improves control over the speed of rotation and prevents the bit from spinning freely and causing damage, which prevents rounding and stripping of screws and removes already damaged screws easily and without further damage.

  • I'm skilled at using a drill, what can it do for me?

    The Ai Drill can tackle any job a standard 20V drill can, only better. Pulse Assist not only prevents stripping screws, it can help remove damaged screws, and provide better control when starting screws or holes in hard, slick surfaces like tile or metal.

    The BitLock chuck tightens 30% more on average than manual tightening to help prevent bits from slipping, and since BitLock can be operated with one hand, the other hand is free to hold the workpiece.

    SafeDrive eliminates the need to set a clutch, which eliminates the time-consuming trial and error setting for a mechanical clutch. SafeDrive also works great for installing drywall without needing a screw gun or other attachment.

  • What are the drilling capacities of the WORX Ai Drill?

    In wood, the maximum recommended hole size is 1". Avoid drilling holes larger than 3/8" in metal.

  • How much torque does the Ai Drill have?

    Torque is a measurement of turning power. The WORX Ai Drill has about 180 inch-pounds of torque letting it easily master most common drilling and driving applications around the house.

  • What kind of chuck does the Ai Drill have?

    Ai Drill makes the best use of the familiar and innovation to make it easier and faster to use. Internally, the Ai Drill chuck is a typical, 3/8" 3-jaw chuck that can hold round or hex shank bits just like a standard drill driver. Externally, however, the design is different. The blue BitLock ring opens and closes the jaws of the chuck without the hassle of manually tightening. Turn the ring in direction of the symbols for lock and unlock to easily remove or securely install a bit.

  • What bits does the Ai Drill use and where can I buy them?

    The Ai Drill uses both hex shank and round shank drilling and driving bits up to 3/8". Worx offers a 67-Piece Drill Bit set and a 16-Piece Drill Bit & Drive set. You can also find other bits available at home centers, hardware stores and anywhere that sells drill bits.

  • Why is there no clutch on the Ai Drill? How are drilling and driving modes changed on the WORX Ai Drill?

    The WORX Ai Drill has a clutch, but instead of a typical trial-and-error clutch, SafeDrive mode is an internal, automatic clutch. Simply begin by holding the trigger down constantly. The driver will detect when the screw is driven to the work surface and stop briefly. Release the trigger if you are happy with the screw depth. If not, hold the trigger and the driver will shift into Pulse Assist. The driver will continue to drive the screw deeper in small increments until the trigger is released. On the top of the drill body is a keypad showing a screw, drill and Pulse icons. Press the icon for the mode you wish to use. A blue light will indicate the active mode.

  • What is the variable speed trigger on the WORX Ai Drill and the Reciprocating Saw?

    The Ai Drill's switch, or trigger, controls the speed of rotation. With the variable speed trigger, the rotation speed increases as the trigger is depressed more. On the Cordless Reciprocating Saw, the pressure-sensitive trigger gives you comfortable control over the speed of the blade. For faster cutting, squeeze the trigger harder, and to slow down, release the trigger to find the right speed for the job at hand.

  • What is the 20V 3-3/8” WorxSaw Compact Circular Saw and how is it different than a traditional circular saw?

    The WorxSaw gives you the power and performance you’d expect in a traditional circular saw, packs it into a compact size that’s easy to maneuver with one hand, then frees you from cords by powering it with a 20V MaxLithium battery. Designed with you in mind, the WorxSaw features the lightweight, ergonomic design is something you expect from Worx without compromising power! How? The saw's 3-3/8" blade has a kerf that is less than half the thickness of larger 7-1/4" circular saw blades. Since this smaller, thinner blade takes much less effort and motor strain to cut through the material, the 4 Amp - 3500 rpm saw can match the performance of full-size circular saws.

    WorxSaw also features left-sided blade design provides remarkable cut-line visibility as well as a vacuum port for dust extraction while working to give you the best possible work experience for precision and safety.

    Get everything you want from a traditional circular saw - with more flexibility and freedom. WorxSaw - power, performance, and comfort that’s easy to control with one hand.

  • Can I bevel cut with the WorxSaw? Is it possible to plunge cut with either saw?

    Bevel cutting isn’t a feature available on the WorxSaw, but it is a great saw for plunge cutting! It can tackle stock up to 1” thick. To plunge cut, adjust the depth gauge along the top of the fixed upper guard to the appropriate setting. Place the base plate against the material and adjust the blade along the cutting line, but do not plunge the blade yet. Turn on the saw and, with the saw running, plunge the blade through the materials. Once you reach the full depth of the cut, move the saw along the cutting line. When you reach the end of the line, disengage the plunge feature before stopping the saw.

    While plunge cutting is not a primary function of the reciprocating saw, in softer materials (like wood), you can plunge cut. Review the owner's manual for more information.

  • What is the Lower Guard Lever on the Compact Circular Saw used for?

    This convenient feature helps improve safety when lining up the blade along cutting lines, and helps make some plunge cuts easier. To use it, set the depth gauge along the top of the fixed upper guard to the appropriate setting. Release the lock-off button carefully, and use a finger to lift the lower guard lever to expose the blade. Line up the blade along the cutting line and carefully release the lower guard lever before engaging the saw and beginning your cut.

  • What is the cutting depth capacity for the WorxSaw Compact Circular Saw? What is the cutting capacity for the Reciprocating Saw?

    The WorxSaw can cut materials up to 1-1/16” thick making it perfect for ripping or plunge cutting 1” stock.

    The Reciprocating Saw can cut wood up to 7”, PVC pipe up to 3", and up to 15/32" thick steel.

  • What kinds of materials can I cut with the WorxSaw Compact Circular Saw and the Reciprocating Saw? What kinds of blades are included? Where can I get more?

    When it comes to cutting, the blade determines the material your saws can tackle, but you can customize to the job at hand by picking a blade to fit your needs. Both saws can handle a variety of materials including wood, aluminum, and PVC, depending on which blade you choose. Included in this kit, you’ll receive a carbide-tipped wood cutting blade for WORX Compact Circular Saw and a wood cutting reciprocating saw blade.

    The WorxSaw can use any 3-3/8” blade with a 19/32” arbor, and the Reciprocating Saw uses standard reciprocating blades (T or U shank) and you can select the type and length of blade most appropriate for the job at hand.

    Compatible blades can be purchased at most local hardware or home improvement stores. Additional blades for the Compact Circular saw blades like the 24TCT Wood cutting blades (WA8203) can be found under Accessories.

  • Does the Cordless Reciprocating Saw have a pendulum/orbital mode?

    Yes, the Worx 20V Cordless Reciprocating Saw has three pendulum mode settings. For fine/detail cutting, set the pendulum action control dial to 0. The settings increase from I through III, which delivers the most aggressive cut, best used for pruning or demolition.

  • How do I use the parallel guide?

    The parallel guide installs on your WorxSaw Compact Circular Saw in seconds and secures in place for confident parallel cuts. First, remove the battery from your WorxSaw to avoid accidental starts.

    Loosen the hex screw at the front of the base plate. Take the long, thin side of the parallel guide and make sure the measured marks are facing up. Insert it into the base plate in front of the blade through the holes in the base. Line up the desired measurement in the notch at the front of the base plate and tighten the screw to secure it in place. Line up the parallel guide’s edge flush against the cutting surface, reinstall the battery and you’re ready to cut!

    To remove the parallel guide, loosen the screw at the front of the base plate and slide the guide out.

  • How hard is it to change blades on the 20V WorxSaw Compact Circular Saw? How hard is it to change blades on the Reciprocating Saw?

    Changing the blades is quick and easy on both saws. For safety, remove the battery from your saws before performing any maintenance or changing the blades to avoid accidental starts.

    On the WORX Compact Circular Saw, press the red spindle lock button behind the blade housing and insert the allen key into the hex bolt holding the blade in place. Unscrew and remove the blade bolt, and the outer flange. Remove the old blade and insert the new one. Once firmly seated, install the flange and blade bolt, finger tightening into place. Use the allen key to secure the bolt, re-install the battery, and you’re ready to go.

    The Worx 20V Cordless Reciprocating Saw features a tool-less blade change you can operate with just one finger. First, secure the saw against accidental starts by clicking the “lock off” to the off position, and remove the battery. Simply push and hold the blade clamp release lever at the cutting head to open the mechanism. Remove or insert a blade. Release the switch to activate the mechanism to keep your blade secure.

  • Can I attach a vacuum to the 20V WorxSaw 3-3/8” Compact Circular Saw?

    The WorxSaw has an onboard vacuum port and comes with a vacuum adaptor so you can attach your favorite shop vac. It’s as easy as installing the adaptor in the port, attach the shop vac and turn it on. (See your owner’s manual for specific instructions.)

  • Does this use the same battery as my other 20V Worx tools?

    Yes! With Power Share, you can share the battery and save money. Your 20V WorxSaw Compact Circular Saw and Cordless Drill Driver can use any Worx 20V battery you already have. By sharing the battery between tools, you’ll always have the power you need to complete any job.

    Need more power on hand? Check out our higher capacity 20V batteries.

  • How long does it take to charge the 20V MAX battery??

    It takes approximately 5 hours to fully charge the battery.

    Additional fast charging options are available.

  • How long will the batteries last?

    Run time can vary on several factors, including the tool, the type of work, the conditions under which work is being performed, and may even vary from user to user. Typically, a fully charged 20V 1.5Ah battery included with the work light will last up to 15 hours on one charge. The batteries can be charged and discharged for about 2,000 cycles.

  • Will a battery-operated saw be powerful enough to get the job done?

    The 20V Worx MAX Lithium battery included with the WorxSaw Compact Circular Saw is the same battery we trust to power the JawSaw, and our ExacTrack Circular Saw, among others, like the Hydroshot and Switchdriver. Since the battery can stand up to those high-powered applications, you can trust it to keep up with you in the WorxSaw.

  • Are lithium batteries interchangeable with the Ni-Cad?

    Our lithium tools and Ni-Cd tools are separate platforms and are not interchangeable. Lithium batteries offer our customers maintenance-free technology without the hassle of managing the memory effect inherent in Ni-Cad batteries.

  • Are the 20V MAX lithium batteries interchangeable with the 32V MAX lithium battery?

    While Power Share allows you to share batteries between tools within the same voltage family, batteries should only be used with tools of a corresponding voltage. Use your 20V MAX Lithium battery with any 20V WORX tool – even the garden tools – but save your 32V battery for your 32V tools.

    The included battery will take you far, but if you need more, Worx offers higher capacity batteries, as well as faster chargers.

  • I’m squeezing the on/off switch on my WorxSaw, but it won’t start. What do I do?

    Worx tools are designed with safety features to protect you against accidental starts, and the WorxSaw is no different. In front of the on/off switch is a lock-off button which must be engaged before the on/off switch will work. To engage it, pull the red button back towards the on/off switch and hold it in place while you squeeze the on/off. Once the saw starts, you can release the lock-off button and the saw will continue to run.

  • What does it mean when the LED light on my Ai drill flashes?

    The flashing LED light indicates the battery charge is getting low or the battery power is interrupted. There is a built-in overload protection that will stop the tool if the battery is suddenly put under too much strain. This feature protects the battery so it will perform a long time. On rare occasion, the Ai Drill will stop itself momentarily if the job application drains power too quickly. Simply release the trigger to reset the driver.

  • The BitLock switch ring on the Ai Drill will not turn. What is the problem?

    On rare occasions, the BitLock may get stuck between gears. Simply put the drill in either forward or reverse and pull the trigger briefly. This should allow the BitLock switch to work appropriately again.

  • I’ve misplaced my manual. Is there anywhere I can get more information?

    You can download the manuals here:

    Ai Drill

    Compact Circular Saw

    Reciprocating Saw

    Flexible Light

  • Are there any precautions I should follow when using the tools in the WX947L kit?

    Carefully review the owner’s manual for all safety information and guidelines. Follow safety precautions while using any power tools – including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back. See the owner’s manual for complete safety instructions and details.

    ATTENTION: For safety, remove the battery when changing the blades or changing the tool between modes. When changing the blade, we recommend wearing gloves to avoid a pinch hazard. When cutting into a wall, shut off water and electricity before working to avoid injury and/or damage. Know where wiring and pipes are before cutting into the wall to avoid unintentional damage.

    NOTE: The Work Light is designed to be weather resistant, but be sure not to leave your light or battery outside in the rain.

  • What is the guarantee/warranty?

    If you decide the WORX WX947L kit isn’t right for you, we offer a 30-day Money Back Guarantee from date of receipt (less shipping and handling). Please call our customer service center at 1-866-354-9679 (WORX) and we’ll be happy to assist. View more information here.

    We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your tools? Register now!

    WORX batteries are covered by a 1 Year Limited Consumer Warranty and are not eligible for warranty extension.

    Parts subject to normal wear and tear are not covered by the tool’s warranty. View more information on our warranty here.

  • Where can I get replacement parts?

    Many replacement parts are available online under Accessories.

  • Can the light bulb in the Flexible Worklight be replaced?

    Given the unique configuration, the bulb isn’t replaceable, but with 10,000 hours of burn time, it’s unlikely you’ll need to replace the bulb for a long time.


Important Information

California proposition 65 WARNING:

This product can expose you to chemicals including lead, phthalate or bisphenol A which are known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands after use. For more information go to www.P65Warnings.ca.gov.

Proposition 65 de la Californie AVERTISSEMENT:

Ce produit peut vous exposer à des produits chimiques, incluant au plomb, au phtalate ou au bisphénol A, qui sont reconnus dans l'État de Californie comme pouvant causer un cancer, des anomalies congénitales ou d'autres dommages à l'appareil reproducteur. Assures-vous de bien vous laver les mains après usage. Pour en savoir plus, veuillez consulter le site www.P65Warnings.ca.gov.

Propuesta de California 65 ADVERTENCIA:

Este producto puede exponerlo a químicos que incluyen plomo, ftalato, o bisfenol A que se sabe en el Estado de California que causan cáncer, defectos de nacimiento u otros daños reproductivos. Lave sus manos después de usarlo. Para más información visite www.P65Warnings.ca.gov.
20V Power Share 4-Piece Kit Including Ai Drill, Worxsaw, Reciprocating Saw and Flex Light is rated 4.9 out of 5 by 11.
Rated 5 out of 5 by from Works great! I used this to top off some 4x4 fence posts. Worked great! Liked them so much that I bought the blower/vac next.
Date published: 2019-02-10
Rated 5 out of 5 by from Awesome Received this kit for Christmas last year and use all the time! Unbelievable products...will be buying more from Worx! Super convenient being battery operated and so powerful.
Date published: 2019-02-07
Rated 5 out of 5 by from Light.and.easy.to.use This.was.my.Christmas.present.to.myself.I.have.been.doing.work.in.the.barn.and.could.not.be.more.pleased.with.my.new.tools!
Date published: 2019-01-06
Rated 5 out of 5 by from Excellent kit. Especially love the new small saw. I really bought this combo to add another one of the great drills to my collection. Now I have two of this new works Grill and they are both excellent. I'm very fond of this new Chuck.
Date published: 2019-01-02
Rated 5 out of 5 by from More substantial than I though I've used dewalt and have craftsman 18and19.2 volt tools . I didn't expect the word to be such well constructed tools . I ended up getting them because I have the weed trimmer ,chain saw and blower that I'm very happy with. I also have a duel charger and a bunch of battery so I figured I would try there new tool kits . I would recommend them highly . I am an electrician and have used many brands of battery tools and find them to be at least high mid grade tools for low grade tool money . Well worth it.
Date published: 2018-12-21
Rated 5 out of 5 by from High Quality Value I bought this kit for several reasons: Having had trouble with the chucks on other cordless drills loosening up, I choose the WORX AI drill for its automated, high torque chuck. I also love the small cordless for work on shingles where other saws would be much too heavy and clumsy. The whole set is high quality and a great buy for the money.
Date published: 2018-12-21
  • y_2020, m_1, d_28, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_2, bvpage2n
  • co_hasreviews, tv_1, tr_10
  • loc_en_US, sid_WX947L, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_worx
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 194.61ms