20V Power Share ExacTrack 6-1/2" Circular Saw - Tool Only


More Views

Exact cuts on the perfect track

Circular saws just became easier with the new ExacTrack™ Circular Saw

ExacTrack™ is an innovative function, which can help to make a straight cut easier by keeping the blade flush against the cutting guide board.

In standard mode the saw will be setup for regular 90 degree or bevel cutting.

Battery & Charger Not Included

20V Power Share ExacTrack 6-1/2" Circular Saw - Tool Only ITEM WX530L.9

Availability: Out of stock


Now Playing
Now Playing
Technical Specifications
  • Rated Voltage
    20V Max
  • No-Load Speed
  • Blade Size
  • Arbor Size
  • Cutting Capacity
    45° 1-17/32"
  • Cutting Capacity
    90° 2-5/32"
  • Bevel Capacity
  • Machine Weight
    5.9 lbs
  • Warranty
    3 Years
You're Getting
  • (1) - ExacTrack 20v 6-1/2" Circular Saw
  • (1) - Carbide-Tipped Blade
  • (1) - Vacuum Adapter
  • (1) - Hex Key
  • *Battery & Charger Not Included*

Frequently Asked Questions

  • Does this come with a battery and charger?

    This is our tool-only version, which does not include either a battery or charger. Tool-only models allow you to take full advantage of our Power Share platform to save money by using the 20V Worx batteries and chargers you already own.

  • How heavy is the ExacTrack 20V 6-1/2” Circular Saw?

    At only 5.1.lbs, the ExacTrack is surprisingly lightweight, but make no mistake, it delivers all the power you expect from a circular saw.

  • What is ExacTrack and how is it different than a traditional circular saw?

    The ExacTrack gives you exactly what you expect in a traditional circular saw, and more and with the lightweight, ergonomic experience you expect from Worx. You still get the cutting efficiency of a 6-1/2” blade, and the ability to bevel cuts up to 50°.

    Where ExacTrack shines is the innovative feature that allows you to make flush cuts. Instead of measuring out your cut, then calculating the difference between the outside edge of the blade guard and where the blade cuts, then lining up a guard, ExacTrack cuts out all the extra work. Make your measurements, then line up ANY guide up to 1” thick right on the line. No calculations, no second measurements, and no mistakes! Engage the ExacTrack feature, set the saw on the guard and make a flush cut along your pre-measured line. ExacTrack puts confidence and accuracy in your hand in half the time.

  • How difficult is it to use the ExacTrack’s flush cutting feature? Can I still use it like a traditional circular saw?

    Like all Worx tools, we focus on the experience of using the tools as much as the innovation behind them. ExacTrack is designed with real world use in mind. Switching ExacTrack between standard cutting mode and guided rip cutting is as easy as flipping a switch. Literally.

    At the back of the base plate under the battery is a red switch with two positions. Use Standard for standard cutting mode. Flip the switch to ExacTrack to unlock the red base plate. Line up your cutting guide (up to 1” thick”) along your cutting line and stabilize appropriately. Rest the red area of the baseplate on your guide, turn on the saw and cut along the guide. It’s that simple.

    When you’re ready to use the standard cutting mode, simply flip the switch back to Standard and enjoy all the same features as a traditional circular saw.

    NOTE: For your safety, we recommend removing the battery before switching the tool between cutting modes.

  • Can I bevel cut with the ExacTrack? Is it possible to plunge cut with this saw?

    Of course! The ExacTrack is capable of making bevel cuts up to 50° and plunge cutting up to 2” thick.

    To bevel cut, make sure the ExacTrack is in Standard cutting mode by checking the switch at the back of the cutting base. Then, loosen the base plate bevel lock knob at the front of the tool and adjust the angle of the base plate to match your desired bevel angle. Tighten the bevel lock knob, and you’re ready to cut.

    To plunge cut, make sure the ExacTrack is in Standard mode and the bevel gauge is set at 0. Loosen the cutting depth lock knob (to left of the battery on the side of the tool) and move the baseplate to the desired depth. Tighten the cutting depth lock knob to secure it in place. Rest the front of the base plate on the work surface. Turn the saw on and plunge into your cutting surface.

  • What is the cutting depth capacity for the ExacTrack?

    In standard, 90° cutting mode, ExacTrack can cut materials up to 2” thick. At a 45° bevel, the cutting capacity is 1-17/32” thick.

  • What kinds of materials can I cut with the Worx ExacTrack 20V 6-1/2” Circular Saw? What kinds of blades are included?

    When it comes to cutting, the blade determines the material your ExacTrack can tackle. Included, you’ll receive a carbide-tipped wood cutting blade, but you can customize to the job at hand by picking a blade to fit your needs. ExacTrack can use any 6-1/2” blade with a 5/8” arbor, which can be found at any hardware and home improvement store.

  • How hard is it to change blades on the ExacTrack 20V 6-1/2” Circular Saw use?

    With the spindle lock and on-board storage for the allen key, changing the blades on the ExacTrack is quick and easy. Remove the battery. Press the spindle lock button and use the allen key to loosen the blade bolt. Unscrew and remove the blade bolt, and the outer flange. Slide back the safety guard and insert the blade. Once completely seated, install the flange and blade bolt, finger tightening into place. Use the allen key to secure the bolt, re-install the battery, and you’re ready to go.

  • What kind of blades does the Worx ExacTrack use? Where can I get more?

    The Worx ExacTrack circular saw uses 6-1/2” circular saw blades with a 5/8” arbor. Customize your ExacTrack by picking the blade most appropriate for the job at hand. These blades can be purchased at any local hardware or home improvement store.

  • Can I attach a vacuum to the Worx ExacTrack 20V 6-1/2” Circular Saw?

    Yes! The ExacTrack features a vacuum port on board and includes an adaptor to fit the most common workshop vacuums.

  • Does this use the same battery as my other 20V Worx tools?

    Yes! With Power Share, you can share the battery and save money. Your ExacTrack 20V 6-1/2” Circular Saw can use any Worx 20V battery you already have. By sharing the battery between tools, you’ll always have the power you need to complete any job.

    If you need additional or higher capacity batteries, or faster chargers, you can find them under Accessories.

  • Will a battery-operated saw be powerful enough to get the job done?

    The 20V Worx MAX Lithium battery included with the Worx ExacTrack 20V 6-1/2” Circular Saw is the same battery we trust to power the JawSaw, and our Cordless Compact Circular saw, among others, like the Hydroshot and Switchdriver. Since the battery can stand up to those high-powered applications, you can trust it to keep up with you in the ExacTrack.

  • Are there any precautions I should follow when using the Worx ExacTrack 20V 6-1/2” Circular Saw?

    Carefully review the owner’s manual for all safety information and guidelines. Follow safety precautions while using any power tools – including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back. See the owner’s manual for complete safety instructions and details.

    ATTENTION: For safety, remove the battery when changing the blades or changing the tool between modes. When changing the blade, we recommend wearing gloves.

  • I’ve misplaced my manual. Is there anywhere I can get more information?

    You can download the manual here.

    Our quick start video tour of the ExacTrack is also available on YouTube.

  • What is the guarantee/warranty?

    If you decide the Worx ExacTrack 20V 6-1/2” Circular Saw isn’t the right tool for you, we offer a 30-day Money Back Guarantee from date of receipt (less shipping and handling). Please call our customer service center at 1-866-354-9679 (WORX) and we’ll be happy to assist. View more information here.

    We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your ExacTrack? Register now!

    Parts subject to normal wear and tear are not covered by the tool’s warranty. View more information on our warranty here.

  • Where can I get replacement parts?

    Need an extra battery? Prefer a faster charger? Many replacement parts are available online under Accessories.


Important Information

California proposition 65 WARNING:

This product can expose you to chemicals including lead, phthalate or bisphenol A which are known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands after use. For more information go to www.P65Warnings.ca.gov.

Proposition 65 de la Californie AVERTISSEMENT:

Ce produit peut vous exposer à des produits chimiques, incluant au plomb, au phtalate ou au bisphénol A, qui sont reconnus dans l'État de Californie comme pouvant causer un cancer, des anomalies congénitales ou d'autres dommages à l'appareil reproducteur. Assures-vous de bien vous laver les mains après usage. Pour en savoir plus, veuillez consulter le site www.P65Warnings.ca.gov.

Propuesta de California 65 ADVERTENCIA:

Este producto puede exponerlo a químicos que incluyen plomo, ftalato, o bisfenol A que se sabe en el Estado de California que causan cáncer, defectos de nacimiento u otros daños reproductivos. Lave sus manos después de usarlo. Para más información visite www.P65Warnings.ca.gov.
20V Power Share ExacTrack 6-1/2" Circular Saw - Tool Only is rated 4.7 out of 5 by 23.
Rated 5 out of 5 by from Is This Slick Or What? Love the ExacTrack feature, no more measuring the distance from the blade to the edge when I cut against a straight edge. It line up the cut perfectly and quickly every time. The saw is well balanced and has a nice comfortable weight to it. It's just another of the ten well made and convenient Worx products that I own and enjoy using.
Date published: 2020-01-17
Rated 5 out of 5 by from Great circular saw Received for fathers day. It works far better then expected. Cut through fence boards with ease. Blade was easy to install.
Date published: 2019-06-16
Rated 5 out of 5 by from Great saw This saw does exactly what you want. My only complaint is that the vacuum adapter I'd a tad too small for the standard shop vac hose. Duct tape fixes that but maybe Worx can address this issue. Otherwise unless you are doing production cutting its the only saw you need. No more cord dragging (and accidentally cutting) for me.
Date published: 2019-01-18
Rated 5 out of 5 by from Excellant Tool Most jobs I do is to cut one or two boards. This handled 3/4" plywood with no effort. Sure beats running an extension cord to run a skill saw for a few cuts. Simply outstanding product and factory blade is top notch. Thanks Worx
Date published: 2018-07-23
  • y_2020, m_2, d_22, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_22
  • loc_en_US, sid_WX530L_bv46_9, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_worx
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 132.25ms