Frequently Asked Questions
Does this come with a battery?
No, this model does not include a battery. This is an electric tool.
How heavy is the TURBINE 600 Leaf Blower?
The great news is that it’s not heavy! The TURBINE 600 Leaf Blower only weighs 6.4 lbs. Our ergonomic design ensures even this small amount of weight is optimally distributed to make clean up comfortable, while keeping the controls easily accessible.
I have seen the TURBINE Leaf Blower as electric or battery operated. Which one is correct?
WORX has an entire family of TURBINE products, some of which are battery operated and some of which are electric. The WG520 is an electric model.
How long is the cord?
The TURBINE 600 Leaf Blower’s attached cord is 11-1/2” and is equipped with an extension cord retainer to help keep your power cords connected, even if it gets caught while you’re working.
What kind of extension cord should I use?
The right extension cord will ensure you get the performance you expect and will extend the life of your blower. Look for an extension cord rated for Outdoor Use and make sure the gauge of the cord is appropriate for the length you’re using. The WG520 is a 12 Amp tool, so check for gauge and length on the grid here
, or in your manual. Your local hardware or garden supply store will be happy to help you select the right cord to meet your needs.
What is the horsepower rating of the TURBINE 600 Leaf Blower? How powerful is it?
Horsepower rating is more accurately used to describe gas-powered tools. The TURBINE 600 Leaf Blower has a power rating of 12 Amps and reaches 28,600 RPMs. With a max airflow of 600 cfm, you can be sure the TURBINE 600 has the power to get the job done.
Is this also a vacuum like some of the other electric blowers WORX offers?
The WG520 does not include a vacuum feature. For a complete 3-in-1 electric leaf blower/vacuum/mulcher, check out the WORX TRIVAC.
Is the TURBINE 600 Leaf Blower variable speed? How do I change the speed?
Yes, the WG520 TURBINE 600 Leaf Blower does have a variable speed control. The control is in the perfect position for one-handed operation. To change the speed of the blower, use the orange dial at the front of the handle to go from low to GO!
Does it come pre-assembled?
Each TURBINE 600 leaf blower comes with some minor assembly required, but it will take less than 3 minutes and will not require tools.
Once I put the TURBINE together, can I disassemble it?
Yes, you can disassemble the TURBINE 600 after you’ve put it together. Press the convenient clip on the left side of the TURBINE nozzle to release the nozzle. Hold this down and pull the nozzle straight away from the motor. Separating the motor and nozzle makes the tool more compact for transport or easy storage in tight spaces.
If you need to further disassemble the nozzle, find the small, rectangular shape with rounded corners near the seam of the two nozzle pieces. Press down hard on this space while pushing the seam against a hard surface. It is difficult to separate, but may be done if necessary.
Are there any precautions I should follow when using the blower with damp leaves? Will I get shocked?
The TURBINE 600 Electric Leaf Blower is double-insulated to prevent shock, but we recommend that our customers follow standard safety precautions while using our tools - including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back.
ATTENTION: The back of the motor housing is the air intake for the TURBINE 600 Leaf Blower. Keep all lose clothing, hair and debris away from this area to avoid accident, injury or damage to the tool. Hold the blower at your side and keep the back of the motor housing clear at all times.
I didn’t receive a wall mount with this tool, but I thought it was supposed to have one. How can I get it?
It’s not missing, just improved. In addition to our passion for innovation, WORX uses customer feedback to continually improve our tools, and some of the feedback we received was not everyone had the space to mount a separate wall bracket to hang their tools - or that it wasn’t compatible with their current storage space. Instead of including an extra piece with the TURBINE 600 Leaf Blower, we built the wall mount into the tool! On the back of the motor housing, under the orange air vent, is a key-hole shaped cutout. This gives you the flexibility to use what you have – hooks, bolts, or nails – to hang up your TURBINE without changing a thing.
What is the guarantee/warranty?
If you decide the TURBINE 600 Leaf Blower isn’t the right blower for you, we offer a 30-Day Money Back Guarantee from date of receipt (less shipping and handling). Please call our customer service center at 1-866-354-9679 (WORX) and we’ll be happy to assist. For more information, click here
We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your TURBINE 600 Leaf blower? Register now!
Parts subject to normal wear and tear are not covered by the tool’s warranty. For more information on our warranty, click here
Where can I get replacement parts?
Lose the nozzle for your blower? Need to replace the clip that holds it in place? Replacement parts are available by contacting our customer service center at 1-866-354-9679 (WORX).
Is the fan in the blower replaceable?
Because of the positioning of the fan in the tool, the fan is not a part we offer as a replaceable item. Our friendly customer service team will be glad to help you find the best solution to get you back up and running. Please contact us at 1-866-354-9679 (WORX).