WORXNITRO 20V 18GA Narrow Crown Stapler-Tool Only
- Proven Power—Worx NITRO tools are built for pro-level performance to elevate power, speed, and productivity on every task.
- Air Impact Technology fires up to 80 staples per minute & 500 shots in one charge (with 2.0Ah battery) to fasten with greater efficiency.
- Tool-free jam release clears jammed staples quickly and easily so you can keep firing without downtime.
- No need to worry about airborne staples—this cordless staple gun uses its anti-ejection design to keep staples in place when you open the magazine.
- Easily set the proper stapling depth using the tool-free depth adjustment dial. Proper depth adjustment prevents staples from sinking too deep or protruding too far out, which helps protect work surfaces.
- Keep a clear line of sight for accurate placement, thanks to the narrow nose design that allows for greater visibility.
- Set staples at the perfect pace with two firing modes: Use Contact Actuated Mode for rapid bump firing or Single Sequential Mode for precise, one-by-one placement.
- Effortlessly release and reload staples without slowing down using the quick-load magazine. The gun’s low staple indicator will let you know when it’s time reload. Dry fire lockout
prevents firing when magazine is empty. - Rubberized soft grip keeps the stapler comfortable to hold and easy to control for an effortless stapling experience.
- Dual LED lighting improves visibility in darker work areas.
- Non-marring pad on the tip of the gun prevents damage to work surfaces.
- Share Batteries, Save Money. Use the 20V Power Share batteries you already own and save money when you purchase the tool only.
Accessorize
Frequently purchased together
Simplified Stapling, Successful Results
High-Efficiency, High-Force Nailing
Rely on rapid firing capability to finish projects faster. Equipped with high-efficiency Air Impact Technology, this cordless staple gun fires up to 80 staples per minute and up to 500 shots per charge (with 2.0Ah battery).
Staple Jams Solved
Tool-free jam release quickly and easily clears jammed staples so you never have to get stuck and lose productivity in the middle of a job.
Safer Stapling
Airborne staples are a problem of the past. With its anti-ejection design, this staple gun keeps staples secure when the
magazine is opened to boost user safety.
the narrow crown stapler fires a narrower staple (approx 1/4" wide) and is used for more of a finish application (i.e. stapling backs onto
cabinets). Also, the wire gauge is thinner (18 gauge) to prevent splitting the wood in the finish applications
18GA narrow crown staples. Compatible lengths 3/4 in – 1-1/2 in
No, the wx844L contains a sealed compressed air cylinder powered by our 20V max lithium-ion battery which drives staples into
material with power and precision.
Narrow crown staplers are generally used for finish and trim applications, such as molding, trim, cabinets, drawers, fascias and other
fine-grained applications. The smaller crown allows the stapler to penetrate a surface without being overly noticeable
Narrow crown staplers are generally used for finish and trim applications, such as molding, trim, cabinets, drawers, fascias and other
fine-grained applications. The smaller crown allows the stapler to penetrate a surface without being overly noticeable
Your narrow crown stapler features a tool free jam release mechanism. Simply raise and unhook the release lever to get access to the jam and clear.
Like any nail gun, there is a chance that you will experience a jam or two. To help prevent the issue, only use fasteners that meet the specification of
your tool. You should also verify the tool is loaded properly. Refer to your owner's manual for trouble shooting if needed.
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into
A non marring pad is attached to the tip of your stapler to help prevent marring or dents on your work piece. An extra pad is located at the back side
of the magazine