Yes, this model comes with 2 batteries and 1 charger. You can use one battery on each tool, or work with one while you charge the other.
The WG954 is the power couple your lawn has always dreamed about. We’ve included the customer favorite TURBINE20V with the brand-new GT Revolution to give you the ultimate in grass trimming and turbine blower technology. The GT Revolution introduces features not available on previous Worx GT models while still retaining the features you expect, like easy conversion from trimmer to edger and mini mow mode. Now lighter than ever before, the GT Revolution includes Command Feed which dispenses line at the touch of a button, on-board spare spool storage, and it’s a full foot longer than previous models to accommodate even our tallest users comfortably.
Absolutely! The Worx Revolution is designed to be fully adjustable from the telescoping shaft, 7-position auxiliary handle, and 6-position pivoting trimmer head. When it comes to height, we’ve got you covered. At its shortest, the GT Revolution is 35-3/4” long, but when fully extended, it’s a full 55-1/2” long. That’s a full foot longer than previous Worx GT models to better accommodate even our tallest users comfortably. Don’t contort yourself to fit your trimmer, let the Worx Revolution adapt to you.
The trimmer only weighs 5.5 lbs, even with the battery installed. As light as this is, the ergonomic design ensures the weight is evenly distributed between the main and auxiliary handle to make trimming a comfortable, easy-to-manage experience for anyone.
The great news is that it’s not heavy! The TURBINE20V Leaf Blower only weighs 5.7lbs. Our ergonomic design ensures even this small amount of weight is optimally distributed to make clean up comfortable and enjoyable while keeping the controls easily accessible.
The TURBINE20V does not include a vacuum feature. For a complete 3-in-1 electric leaf blower/vacuum/mulcher, check out the Worx Trivac.
Yes, the TURBINE20V Leaf Blower does have a two-speed control. The control is in the perfect position for one-handed operation. To change the speed of the blower, use the orange dial at the front of the handle to go from low to GO!
Runtime will vary from job to job, from tool to tool, and sometimes between users, depending on how each person works. Actual results may vary depending on the density of the grass or weeds you’re cutting or the age of the battery pack.
The two 2.0Ah 20 Volt Max Lithium Batteries included are designed to provide enough working time per charge to trim up to the average 1/4 acre yard on one charge.
To maximize the runtime you get out of the battery when using the TURBINE20V, use the appropriate speed for the job at hand. The lower speed is ideal for cleaning off hard surfaces, like driveways, sidewalks, patios, or garages. The high speed is ideal for cleaning the leaves out of your grass, use more power to give you the blowing force you need to get the job done. Since most clean up jobs will involve switching between lower and faster speeds, actual runtime results will vary.
The included batteries will take you far, but remember you can also use the 20V Worx batteries you already have so you’ll never be out of power.
The lithium batteries that power the Worx GT Revolution and TURBINE20V are the same batteries we use in our professional cordless drills. They’re powerful to drill through concrete and large timber, so they’re definitely powerful enough to trim your grass and weeds and give your lawn the professionally manicured edge you’ve always wanted.
This combo kit features our 2.0 Ah 20 Volt Max Lithium Battery. The amp hour rating measures how much energy can be stored in the battery (energy capacity). This 2.0 Ah battery can hold almost twice the amount of energy as our 1.3 Ah model in the same size due to advanced battery chemistry, which means more power and run time when it really counts.
Battery powered DC motors are not rated for horsepower as output power is only measured with gas or induction AC (corded) motors. You can depend on the power they provide. Designed with sufficient power to get the job done quickly & easily, Worx 20V 2.0 Amp hour batteries are twice as powerful as our previous 20V batteries, an expansion achieved through advanced battery chemistry and not by increasing the size. The Amp hour rating measures how much energy can be stored in the battery (energy capacity), giving your GT Revolution more runtime for trimming. And with a max airflow of 340cfm, you can be sure the TURBINE20V has the power to get the job done, whether the job is cleaning up flower beds, sweeping out the garage or drying off your car after washing it.
It takes about 5 hours to fully charge each of the included batteries with the included charger. With two, you can keep one on the charger while you work, and monitor your battery’s power level with the built-in power gauge.
Faster chargers and higher capacity batteries are available under Accessories.
Absolutely! The 2.0Ah 20V Max Lithium batteries included are compatible with over 30 other 20V Max Worx Power Share tools – and if you already have 20V Max Worx batteries, you can use them on either the GT Revolution or the TURBINE20V. Power Share lets you share batteries to save money - add versatility to your toolbox for less by adding tools without unnecessary batteries or chargers.
See the entire 20v Power Share line.
Our lithium tools and Ni-Cd tools are separate platforms and are not interchangeable. Lithium batteries offer our customers maintenance-free technology without the hassle of managing the memory effect inherent in Ni-Cad batteries.
Worx GT has a history of changing the game when it comes to feeding trimming line, and the Revolution is no exception. Bumping to advance the line became a thing of the past with auto-feeding line on the first GT, and now, COMMAND FEED® puts the control at your fingertips. If at any time, you need more line for your trimmer, just press the COMMAND FEED® button to release more line. You’ll get the perfect amount of line without stopping your work or getting your hands dirty. It’s that easy.
You can adjust the angle of the auxiliary handle as easily as pushing a button. Where the handle meets the shaft of the GT Revolution, there’s an orange button. Push the button and move the handle to the desired position. Release the button to lock it in place.
First find the pivot head locking knob, located where the shaft meets the trimmer cutting head and turn it in the “unlock” position. Place the trimmer head on the floor and put your foot on the cutting head. Lift or lower the handle to your preferred angle while stabilizing the head on the ground. The Revolution will click through the positions. Once you’ve found the perfect angle for you, turn the pivot head locking knot bot the “lock” position, and you’re ready to get back at it!
Converting your trimmer from Trimmer to Edger, or to a Mini-Mower is quick and easy, just like our GT 2.0.
To turn the cutting head for edging mode, grasp the black part of the shaft just above the cutting head with one hand and the orange locking collar with the other hand. Pull the tool apart, and you’ll feel the parts of the Revolution slide about an inch along the shaft. Twist the hand on the shaft over the cutting head 90 degrees and release. To convert it back to trimming, repeat the steps, but twist 90 degrees in the opposite direction.
To use your Revolution in mini mower mode, use the same cutting head angle you would for trimming. Install the wheels under the safety guard in the position that works best for the area you’re trimming. Adjust the cutting head angle to give you the best ergonomic position and you’re ready to cut!
Each Worx Revolution Trimmer / Edger / Mini-Mower includes three (3) pre-loaded spools of cutting line to get you started. Extra spools are free of charge in our Free Spools for Life program for as long as you own your trimmer; you just cover the cost of shipping and handling any time you need more! Order additional pre-loaded spools here.
Some stores do offer spools for sale in smaller packs, and while these may be the answer if you run out and need them right away, we recommend taking advantage of the Free Spools for Life program benefits included with the purchase of your trimmer.
Our Double Helix line is specially designed to work with the Worx GT Revolution COMMAND FEED®, and give you a quicker and more efficient cut to help maintain a healthy, professionally groomed lawn. With the purchase of your Worx GT Revolution, you’re automatically enrolled in our Free Spools for Life program. You get free spools pre-loaded with 10 feet of line anytime you need them; just pay shipping and handling for each package of 6. (Order online)
If you decide to use a traditional line, the Worx Revolution can accept standard 0.065” cutting line found at any garden or home center and can be wound around our empty spool cartridges. Refer to your owner’s manual for important details about how to wind the line on the spools and keep in mind that with conventional cutting line, COMMAND FEED® may not work as expected.
Each tool comes with some minor assembly required, which may take up to 5 minutes per tool. A step-by-step instruction manual is included along with easy assembly instructions. Please have a #2 Phillips head screwdriver on hand when assembling your GT Revolution.
The safety guard is an essential part of the GT Revolution. Not only does it keep you safe from any debris from the trimming/edging, it also helps regulate the length of the cutting line. Without the safety guard, your Worx GT Revolution will not operate properly and you are at risk for injury.
Yes, you can disassemble the TURBINE20V after you’ve put it together. Press the convenient clip on the left side of the TURBINE20V nozzle to release the nozzle. Hold this down and pull the nozzle straight away from the motor. Separating the motor and nozzle makes the tool more compact for transport or easy storage in tight spaces.
If you need to further disassemble the nozzle, find the small, rectangular shape with rounded corners near the seam of the two nozzle pieces. Press down hard on this space while pushing the seam against a hard surface. It is difficult to separate but can be done if necessary.
Carefully review the owner’s manual for all safety information and guidelines for using the Worx GT Revolution and the Worx TURBINE20V. The Worx TURBINE Leaf Blower is double-insulated to prevent shock, though we strongly recommend our customers follow safety precautions while using any power tools – including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back. See the owner’s manual for complete safety instructions and details.
ATTENTION: The back of the motor housing is the air intake for the TURBINE 600 Leaf Blower. Keep all loose clothing, hair and debris away from this area to avoid accident, injury or damage to the tool. Hold the blower at your side and keep the back of the motor housing clear at all times.
If you decide this Worx combo kit isn’t the right tool for you, we offer a 30-day Money Back Guarantee from date of receipt (less shipping and handling). Please call our customer service center at 1-866-354-9679 (WORX) and we’ll be happy to assist. View more information here.
We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your Revolution and TURBINE20V? Register now!
Parts subject to normal wear and tear are not covered by the tool’s warranty. View more information on our warranty here.
Lose a spool cap cover? Need an extra battery or charger? Many replacement parts are available online under Accessories.
Because of the positioning of the fan in the tool, the fan is not a part we offer as a replaceable item. Our friendly customer service team will be glad in helping you find the best solution to get you back up and running. Please contact us at 1-866-354-9679 (WORX).