WX169L TECHNICAL SPECIFICATIONS

WX290L TECHNICAL SPECIFICATIONS

Yes, this model includes 2 batteries.

The Cordless Impact Drill takes ¼ in. (0.63 cm) hex bits. The 16-Piece Drill & Drive Bit Set includes compatible bits.

The Cordless Drill & Driver can use either hex or round shank bits up to 3/8 in. (0.95 cm). Check out these bit sets that cover just about every application you may need:

16-Piece Drill & Drive Bit Set

67-Piece Drill Bit Accessory Kit (with roll up case)

You can find individual bits to suit the need of any job at your local hardware or home improvement store.

The Cordless Impact Driver uses a quick change chuck to make changing bits easy, and the 20V Cordless Drill & Driver uses a keyless, 3 jaw chuck for versatility. For information on how to install bits, refer to your owner's manual.

The maximum drilling capacity will vary depending on the material you're working with.

Steel: 3/8 in. (0.95 cm)

Wood: 1 in. (2.54 cm)

The Drill & Driver features a 15 + 1 position clutch to allow for precise torque management. The Impact Drill does not have clutch positions.

Even with the battery installed, each tool is less than 3 lbs. (1.36 kg)

The impact rate for the driver can reach up to 3000 IPM and has a maximum torque of up to 950 in-lbs. What the Cordless Impact Driver will deliver on any particular job will vary depending on the task at hand, but you'll have plenty of power for driving large, difficult fasteners or removing stubborn or rusted ones.

The Cordless Drill & Drivers offers a two speed gear control, and the Cordless Impact Driver's variable speed control trigger allows you to customize the speed to the job by applying more pressure on the trigger.

Run time depends on the type of work, the conditions under which work is being performed, the Amp hour rating of the batteries being used, and may even vary from user to user. The batteries can be charged and discharged for about 2,000 cycles. PowerShare allows you to use any 20V Worx battery you have on hand with your 20V tools, so you'll always have the power on hand to complete any job.

Higher capacity batteries and faster charging options are available.

It will take about 5 hours to recharge the included batteries with the included charger.

Faster charging options and dual port chargers are available

Yes! With Powershare, you can share the battery and save money. Your 20V Worx tools can use any Worx 20V battery you already have. By sharing the battery between tools - even between power and garden tools and you'll always have the power you need to complete any job.

Check out the entire PowerShare family

Yes, there’s an LED light on both the 20V Cordless Drill & Driver and Impact Driver to help you see what you’re working on.

The flashing LED light indicates the battery charge is getting low or the battery power is interrupted. This feature protects the battery so it will perform a long time.

Carefully review the owner’s manual for all safety information and guidelines. Follow safety precautions while using any power tools – including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back. See the owner’s manual for complete safety instructions and details.

You can download the manual for the Cordless Impact Driver here.

You can download the manual for the Cordless Drill & Driver here.

If you decide the Worx 20V Cordless Impact Driver isn’t right for you, we offer a 30-day Money Back Guarantee from date of receipt (less shipping and handling). View more information here.

We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your 20V Cordless Drill & Driver and Impact Driver? Register now

Parts subject to normal wear and tear are not covered by the tool’s warranty. View more information on our warranty here.

Need a higher capacity battery? Looking for a faster charger? Many accessories are available online under Accessories.