20V Power Share GT Revolution String Trimmer/Edge/Mini-Mower & Turbine Blower Combo Kit
- Save $39.99 when purchasing the combo kit versus buying both tools individually!
- Together in one box; The GT Revolution and all-new cordless Turbine leaf blower.
- Patented COMMAND FEED® Technology automatically extends fresh line, as you need it. Don't stop. Just press and trim.
- A Full Foot Longer than the original WORX GT. Plus extreme versatility with 7 different handle and 6 different rotating head positions.
- Less Downtime with the new extra spool holder on board. Just snap in an extra spool before leaving the garage.
- TURBINE fan technology delivers forceful, high-capacity air volume.
- 2-Speed control for versatility to switch between lighter & tougher jobs.
- Same Battery, Expandable Power. The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share™ family.
GET TO KNOW THE COMBO KIT
20V GT REVOLUTION
- Innovative Command Feed™ extends line on command
- Switch between trimmer, edger and mini-mower
- Bonus spool holder keeps extra line on-board
- Adjustable handle offers max comfort & control
- Shaft adjusts to suit any height & posture
- Trimmer head pivots 90° to reach tight spaces
20V TURBINE BLOWER
- High-capacity air volume moves up to 360 CFM
- 2 speeds for tackling lighter & heavier jobs
- Lightweight for one-hand operation
- Hyper-steam air nozzle blasts away stubborn debris
PRO CURB APPEAL AT YOUR FINGERTIPS
JUST KEEP TRIMMING
Innovative Command Feed™ automatically extends the spool line with the push of a button. No more stopping or slowing down.
3 TOOLS IN 1
Move from one lawn task to another without missing a beat. Converts from a precision trimmer to an in-line edger to a mini-mower in seconds.
STAY ON THE JOB
New on-board spool holder lets you make spool changes on-the-go.
SAY GOODBYE TO YOUR RAKE
LIGHT YET MIGHTY
At only 4.9 lbs., even with the battery installed, you can clean up the whole yard and then some without getting fatigued.
HARNESS THE POWER OF TURBINE
Powerful WORX TURBINE fan technology delivers forceful, high-capacity air volume to show those leaves who’s boss.
NEED FOR 2-SPEED
Choose from two speeds to customize airflow for each task at hand. Keep delicate plants intact or blast away stubborn debris.
WG170.2 TECHNICAL SPECIFICATIONS
WG547 TECHNICAL SPECIFICATIONS
Worx GT has a history of changing the game when it comes to feeding trimming line, and the Revolution is no exception. Bumping to advance the line became a thing of the past with auto-feeding line on the first GT, and now, COMMAND FEED® puts the control at your fingertips.
Your trimmer is equipped with COMMAND FEED®. To efficiently feed the line, just press the COMMAND FEED® button as needed while the machine is running until you hear the ‘clattering’ noise of the line cutting. The line will automatically feed to the perfect length for trimming. The motor will shut off when pressing the COMMAND FEED® button and will restart when the button is released.
Absolutely! The Worx Revolution is designed to be fully adjustable from the telescoping shaft, 7-position auxiliary handle, and 6-position pivoting trimmer head. When it comes to height, we’ve got you covered. At its shortest, the GT Revolution is 35-3/4” long, but when fully extended, it’s a full 55-1/2” long. That’s a full foot longer than previous Worx GT models to better accommodate even our tallest users comfortably. Don’t contort yourself to fit your trimmer, let the Worx Revolution adapt to you
The trimmer only weighs 5.5 lbs, even with the battery installed. As light as this is, the ergonomic design ensures the weight is evenly distributed between the main and auxiliary handle to make trimming a comfortable, easy-to-manage experience for anyone.
The two 2.0Ah 20 Volt Max Lithium Batteries included are designed to provide enough working time per charge to trim up to the average 1/4 acre yard on one charge. Actual results may vary depending on the density of the grass or weeds you’re cutting or the age of the battery pack.
It takes about 5 hours to fully charge each of the included batteries with the included charger. With two, you can keep one on the charger while you work, and monitor your battery’s power level with the built-in power gauge.
Faster chargers and higher capacity batteries are available under Accessories.
Absolutely! The 2.0Ah 20V Max Lithium batteries included are compatible with over 30 other 20V Max Worx Power Share tools – and if you already have 20V Max Worx batteries, you can use them on the GT Revolution. Power Share lets you share batteries to save money - add versatility to your toolbox for less by adding tools without unnecessary batteries or chargers. See the whole 20V line here.
First find the pivot head locking knob, located where the shaft meets the trimmer cutting head and turn it in the “unlock” position. Place the trimmer head on the floor and put your foot on the cutting head. Lift or lower the handle to your preferred angle while stabilizing the head on the ground. The Revolution will click through the positions. Once you’ve found the perfect angle for you, turn the pivot head locking knot back to the “lock” position, and you’re ready to get back at it!
Converting your trimmer from Trimmer to Edger, or to a Mini-Mower is quick and easy, just like our GT 2.0.
To turn the cutting head for edging mode, hold down the black trimmer line guard with your foot. Pull upward on the telescopic shaft such that the shaft displaces by roughly an inch. Then twist the telescopic shaft clockwise 90 degrees and release. The shaft will automatically lock back into position automatically.
To use your Revolution in mini mower mode, use the same cutting head angle you would for trimming. Install the wheels under the safety guard in the position that works best for the area you’re trimming. Adjust the cutting head angle to give you the best ergonomic position and you’re ready to cut!
Each Worx Revolution Trimmer / Edger / Mini-Mower includes three (6) pre-loaded spools of cutting line to get you started. Extra spools are free of charge in our Free Spools for Life program for as long as you own your trimmer; you just cover the cost of shipping and handling any time you need more! Order additional pre-loaded spools here.
The safety guard is an essential part of the tool. Not only does it keep you safe from any debris from the trimming/edging, it also helps regulate the length of the cutting line. Without the safety guard, your Worx GT Revolution will not operate properly and you are at risk for injury.
If you decide the Worx GT Revolution isn’t the right tool for you, we offer a 30-day Money Back Guarantee from the date of receipt (less shipping and handling). View more information here.
We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your Revolution? Register now!
Parts subject to normal wear and tear are not covered by the tool’s warranty. View more information on our warranty here.
Lose a spool cap cover? Need an extra battery or charger? Many replacement parts are available online under Accessories.
This blower does not include a vacuum or mulching feature. However, we do offer a large lineup of 3-in-1 Blower, Mulcher, Vacuums for your yard work demands