Nitro 20V Brushless Hydroshot Plus Portable Power Cleaner (710 MAX PSI) – Tool Only
- Busts tough grime and cleans surfaces effortlessly with a max 710 PSI & 0.9 GPM.
- Hydroshot Plus features a new pump design that delivers a 70% more powerful stream than the previous model. Achieves impressive spraying distance with a max 24.3-ft. horizontal & 19.7-ft. vertical reach.
- Brushless Motor 2.0 tech delivers 40% more power and 10% longer runtime than standard brushless motors, plus a 10X longer life over brushed motors.
- Included PowerShare™ Pro battery is designed to extend runtime stay cool, resist damage, and optimize power control so you can clean more and recharge less.
- Compact, lightweight body of only 4.41 lbs. maximizes comfort and control to make cleaning a breeze. Its upgraded design to deliver the best power-to-weight ratio when compared to previous models.
- 5-in-1 multi-spray nozzle easily adjusts between several settings for truly versatile cleaning capability. Nozzle features 0°, 15°, 25°, 40°, and Rinse spray settings.
- Take Hydroshot Plus anywhere—even in remote areas—for true cordless cleaning freedom. Its self-priming ability draws water from any source—such as lakes, pools, and buckets—for maximized portability.
- Quickly switch between two pressure modes to suit your cleaning needs. High pressure is ideal for tough debris removal. The lower ECO mode is great for rinsing and boosting runtime.
- Rapidly connects to garden hoses for instant water supply convenience.
- Share Batteries, Save Money. Use the 20V PowerShare™ batteries you already own and save money when you purchase the tool only.
Accessorize
Frequently purchased together
The Perfect Power Cleaning Solution
Brushless Motor 2.0
The Hydroshot Plus features a High-Efficiency Brushless Motor 2.0 to elevate the tool’s power, extend the runtime, and increase the product life.
Draws Water From Any Source
Attach the 20-ft. quick-connect hose to pull from any fresh water source. With the ability to draw water from a bucket, pool, or lake, the Hydroshot Plus is primed for portability.
5 Spray Settings
Use the 5-in-1 multi-spray nozzle to seamlessly dial between switch between 0°, 15°, 25°, 40°, and Rinse settings to fit the demands of your cleaning task. And with the long cleaning lance, spraying inaccessible areas is made easy.
PSI is the pressure (lbs. per square inch) at which the water exits the nozzle. GPM (gallons per minute) refers to the volume of water that exits the nozzle within a specific period. The higher the PSI of a power cleaner, the more grime it can remove within a concentrated area. The higher the GPM, the more debris it can flush away from a larger cleaning area.
Rotate the edge of the included 5-in-1 multi-spray nozzle to switch between 0°, 15°, 25°, 40°, and Rinse settings.
To remove the nozzle, slide down the brass ring on the end of the cleaning lance and pull out the nozzle. To insert the nozzle, hold down the brass ring and place the nozzle’s 1/4" quick-connect fitting inside the end of the lance. Next, release the brass ring and the nozzle should snap into place.
After the initial setup, the hose may still have air trapped inside that causes sputtering. Continue to squeeze the trigger to move water through the wand until all air is released to achieve a consistent spray.
A pulsing sensation is due to excessive pump pressure that may be caused by a dirty of clogged nozzle. To fix, first remove the battery and disconnect the water supply. Next, squeeze the trigger to remove any remaining water. Then, remove the nozzle and clean out clogged debris using a paper clip or similar device. Use a garden hose to run water through the back of the nozzle to clear out remaining debris. Reattach the nozzle to the cleaning lance, reattach the battery, and reconnect the water source to resume smooth spraying.
First, release any kinks in the hose to reestablish proper water flow. If the problem persists, ensure all parts are tightly secured and the battery is properly attached. You may also need to clean out a dirty or clogged nozzle.
Use a clean cloth and water to remove dirt, dust, oil, and grease. Do not use commercial solvents, as these may damage plastic parts. You should also periodically inspect the device for damaged, missing, or loose parts such as screws, nots, bolts, caps, etc. Securely tighten all fasteners and caps and do not operate until all missing components are replaced. Please call customer service for further assistance.
Remove the battery and disconnect the hose. Empty all water from the hose and coil it without kinks before placing it in the storage area. Tilt the power cleaner to ensure all remaining water is drained. Store all components in a dry, frost-free covered area away from harsh weather conditions.