Frequently Asked Questions
How heavy is the TURBINE FUSION Leaf Blower, Mulcher & Vacuum?
One of the lightest tools in its class, the TURBINE FUSION only weighs 9.3 lbs. Our ergonomic design ensures that even this small amount of weight is optimally distributed to make cleanup comfortable and enjoyable, while keeping the controls easily accessible.
I have seen the TURBINE Leaf Blowers as electric or battery operated. Which one is correct?
WORX has an entire family of TURBINE products, some of which are battery operated and some of which are electric. The WG510 is an electric model.
How long is the cord?
The TURBINE FUSION Leaf Blower, Mulcher & Vacuum’s attached cord is 11-1/2” long and is equipped with an extension cord retainer to help keep your power cords connected, even if it gets caught while you’re working.
What kind of extension cord should I use?
The right extension cord will ensure you get the performance you expect and will extend the life of your blower. Look for an extension cord rated for Outdoor Use and make sure the gauge of the cord is appropriate for the length you’re using. The WG510 is a 12 Amp tool, so check for gauge and length on the grid here
, or in your manual. Your local hardware or garden supply store will be happy to help you select the right cord to meet your needs.
What is the horsepower rating of the TURBINE FUSION Leaf Blower, Mulcher & Yard Vacuum? How powerful is it?
Horsepower rating is more accurately used to describe gas-powered tools. The TURBINE Fusion Leaf has a power rating of 12 Amps and reaches 16,500 RPMs. With a max airflow of 525 cfm, the TURBINE FUSION has the power to get the job done.
Is this also a vacuum like some of the other electric blowers WORX offers?
Yes, the WG510 is a complete 3-in-1 electric leaf blower, mulcher & yard vacuum.
How do I attach the leaf collection bag?
Attaching the leaf collection bag is quick and easy! First, open the vacuum cover by pressing the orange tab at the back of the motor housing and opening the screen towards the nozzle until it stays in place. Take the bag accessory by the handle and rest the tab at the front of the opening into the notch on the body of the TURBINE FUSION near the motor housing opening. Pivot the bag closed by pulling the handle towards the motor housing until the orange tab snaps into place.
You may also refer to images H1-H4 in your manual or see it demonstrated in the Product Overview Video
What kind of mulching blade is in the TURBINE FUSION Leaf Blower, Mulcher & Vacuum? What is the mulching ratio?
The impeller/mulching blade for the TURBINE FUSION Leaf Blower, Mulcher & Vacuum is a dual-stage metal impeller for durability and maximum mulching power – a ratio of 24:1.
Is the TURBINE FUSION Leaf Blower variable speed? How do I change the speed?
Yes, the WG510 TURBINE FUSION Leaf Blower, Mulcher & Vacuum does have a 2-speed control. The control is in the perfect position for one-handed operation. To change the speed of the blower, use the orange switch at the front of the handle to go from low to GO!
Does it come pre-assembled?
Each TURBINE FUSION leaf blower comes with some minor assembly required, but it will take less than 3 minutes and will not require tools.
How do I assemble the TURBINE FUSION Leaf Blower, Mulcher & Yard Vacuum?
To assemble the TURBINE FUSION, snap together the two nozzle pieces, making sure that the grooved tabs on the front nozzle piece fit securely into the corresponding cutouts on the back nozzle piece (Featured in the manual as Figure A). Fit the wider end of the tube over the front of the motor housing, lining up the pegs on the motor housing to the channels on the nozzle (See Figure B in the manual). Turn clockwise to lock and secure. That’s it!
Once I put the TURBINE FUSION together, can I disassemble it?
Yes, you can disassemble the TURBINE FUSION after you’ve put it together. Press the orange clip under the nozzle to release the nozzle and twist the nozzle counterclockwise. Separating the motor and nozzle makes the tool more compact for transport or easy storage in tight spaces.
If you need to further disassemble the nozzle, find the grooved indentation on each side near the seam at the middle of the two nozzle pieces. Press down hard on these while pushing the seam against a hard surface. It is difficult to separate, but can be done if necessary.
Are there any precautions I should follow when using the blower with damp leaves? Will I get shocked?
The TURBINE FUSION Electric Leaf Blower is double-insulated to prevent shock, but we recommend that our customers follow standard safety precautions while using our tools - including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back.
The TURBINE FUSION will handle damp leaves, but note that wet leaves may cause clogging. For optimum performance, be sure to allow for proper airflow when vacuuming. When switching from blowing to mulching, be sure the impeller has stopped before opening the protective screen to attach the collection bag.
With a superfine mulching ratio, the WG510 may produce dust when mulching dry leaves. For those with sensitivity to dust and allergens, we recommend taking precautions to protect yourself appropriately.
ATTENTION: The bottom of the motor housing is the air intake for the TURBINE FUSION Leaf Blower, Mulcher & Vacuum. Keep all lose clothing, hair and debris away from this area to avoid accident, injury or damage to the tool. Hold the blower at your side and keep the bottom of the motor housing clear at all times. For safety, if the air intake screen is not closed, the TURBINE FUSION will not operate.
What is the guarantee/warranty?
If you decide the TURBINE FUSION Leaf Blower isn’t the right blower for you, we offer a 30-Day Money Back Guarantee from date of receipt (less shipping and handling). Please call our customer service center at 1-866-354-9679 (WORX) and we’ll be happy to assist. For more information, click here
We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your TURBINE 600 Leaf blower? Register now!
Parts subject to normal wear and tear are not covered by the tool’s warranty. For more information on our warranty, click here
Where can I get replacement parts?
Lose the nozzle for your blower? Need to replace the clip that holds it in place? Replacement parts are available by contacting our customer service center at 1-866-354-9679 (WORX).
Is the mulching blade in the blower replaceable?
Because of the positioning of the impeller in the tool, it is not a part we offer as a replaceable item. Our friendly customer service team will be glad in helping you find the best solution to get you back up and running. Please contact us at 1-866-354-9679 (WORX).