20V MAKERX Small Crafting Tool Combo Kit
WX739L.9 TECHNICAL SPECIFICATIONS
WX741L.9 TECHNICAL SPECIFICATIONS
WX742L.9 TECHNICAL SPECIFICATIONS
WX744L.9 TECHNICAL SPECIFICATIONS
The MAKERX Rotary Tool accepts all standard rotary tool accessories, provided the proper collet is in place.
Paint designated for the application is best. Make sure the paint is thin enough to pass through the nozzle without clogging. Clean the nozzle, cup, and cylinder thoroughly after use.
The 1/4" arbor adapter allows the grinder to use Dremel® EZ-Lock™ wheels.
*Brands are trademarks owned by third parties which may be registered by their respective owners.
If the Wood & Metal Crafter has not been moved for about 5 minutes, the temperature will drop to 400˚F. If the tool remains motionless for another 10 minutes, the tool will shut off all together.
These recommendations will help maximize the performance of your tool, and achieve the best results.
•Do not subject the tool or accessory to heavy load. Use light, constant pressure. Pushing harder typically does not improve removal rate or performance. Be patient and let the tool work as designed.
•Allow the tool to reach target rotation speed before engaging the work piece. Use the fastest rotation possible while still achieving desired results. Typically, tougher materials require faster rotation speeds.
•Clamp the workpiece whenever possible. A moving work piece is more likely to create a pinching or binding situation. When using a cutting wheel, keep the wheel straight in the cut. If the wheel is twisted, it will tend to grab and climb out of the cut. The tool will shut off in an effort to prevent this situation, which is called kickback.
•If the tool does stop suddenly, press the power button to turn it off. Remove the accessory from the workpiece. Turn the tool back on and allow the rotation to build to target speed. This may take between 1.5 to 3 seconds. Resume the work gradually. If cutting, take care to follow the cut path already established. Do not twist or bind the blade.
Any Worx 20V Power Share™ battery will work with the Hub.
The cord reaching from the Hub to the MakerX tools is 4 ft. long.
No, the Hub is strictly designed to power the MakerX series of tools, along with a 20V Power Share™ battery.


Contrary to popular belief, Lorem Ipsum
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident laborum.

Accessorize
Frequently Purchased Together
Contrary to popular belief, Lorem Ipsum


Contrary to popular belief, Lorem Ipsum
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident laborum.


Contrary to popular belief, Lorem Ipsum
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident laborum.


Contrary to popular belief, Lorem Ipsum
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident laborum.