No, this model does not come with a battery. The WG170.9 is a tool-only model.
The GT Revolution introduces features not available on previous Worx GT models while still retaining the features you expect on a Worx GT, like easy conversion from trimmer to edger and mini mow mode. Now lighter than ever before, the GT Revolution includes Command Feed which dispenses more line at the touch of a button, on-board spare spool storage, and it’s a full foot longer than previous models to accommodate even our tallest users comfortably.
Worx GT has a history of changing the game when it comes to feeding trimming line, and the Revolution is no exception. Bumping to advance the line became a thing of the past with auto-feeding line on the first GT, and now, CommandFeed puts the control at your fingertips.
Your trimmer is equipped with CommandFeed. To efficiently feed the line, just press the CommandFeed button as needed while the machine is running until you hear the ‘clattering’ noise of the line cutting. The line will automatically feed to the perfect length for trimming. The motor will shut off when pressing the CommandFeed button and will restart when the button is released.
Absolutely! The Worx Revolution is designed to be fully adjustable from the telescoping shaft, 7-position auxiliary handle, and 6-position pivoting trimmer head. When it comes to height, we’ve got you covered. At its shortest, the GT Revolution is 35-3/4” long, but when fully extended, it’s a full 55-1/2” long. That’s a full foot longer than previous Worx GT models to better accommodate even our tallest users comfortably. Don’t contort yourself to fit your trimmer, let the Worx Revolution adapt to you.
The trimmer only weighs 4.7 lbs. The GT Revolution’s ergonomic design ensures the weight is evenly distributed between the main and auxiliary handle to make trimming a comfortable, easy-to-manage experience for anyone.
Absolutely! The GT Revolution is part of our Worx Power Share line, one of the over 30 Worx 20V Max tools that share the same 20V Max Worx batteries. Power Share lets you share batteries to save money - add versatility to your toolbox for less by adding tools without unnecessary batteries or chargers. See the whole 20v line here.
Battery powered DC motors are not rated for horsepower as output power is only measured with gas or induction AC (corded) motors. Worx lithium powered products were designed with sufficient power to get the job done quickly & easily.
Each trimmer comes with some minor assembly required, which may take up to 5 minutes per tool. A step-by-step instruction manual is included along with easy assembly instructions. Please have a #2 Phillips head screwdriver on hand when assembling your GT Revolution.
You can adjust the angle of the auxiliary handle as easily as pushing a button. Where the handle meets the shaft of the GT Revolution, there’s an orange button. Push the button and move the handle to the desired position. Release the button to lock it in place.
First find the pivot head locking knob, located where the shaft meets the trimmer cutting head and turn it in the “unlock” position. Place the trimmer head on the floor and put your foot on the cutting head. Lift or lower the handle to your preferred angle while stabilizing the head on the ground. The Revolution will click through the positions. Once you’ve found the perfect angle for you, turn the pivot head locking knot back to the “lock” position, and you’re ready to get back at it!
Converting your trimmer from Trimmer to Edger, or to a Mini-Mower is quick and easy, just like our GT 2.0.
To turn the cutting head for edging mode, grasp the black part of the shaft just above the cutting head with one hand and the orange locking collar with the other hand. Pull the tool apart, and you’ll feel the parts of the Revolution slide about an inch along the shaft. Twist the hand on the shaft over the cutting head 90 degrees and release. To convert it back to trimming, repeat the steps, but twist 90 degrees in the opposite direction.
To use your Revolution in mini mower mode, use the same cutting head angle you would for trimming. Install the wheels under the safety guard in the position that works best for the area you’re trimming. Adjust the cutting head angle to give you the best ergonomic position and you’re ready to cut!
Each Worx Revolution Trimmer / Edger / Mini-Mower includes three (3) pre-loaded spools of cutting line to get you started. Extra spools are free of charge in our Free Spools for Life program for as long as you own your trimmer; you just cover the cost of shipping and handling any time you need more! Order additional pre-loaded spools here.
Some stores do offer spools for sale in smaller packs, and while these may be the answer if you run out and need them right away, we recommend taking advantage of the Free Spools for Life program benefits included with the purchase of your trimmer.
Our Double Helix line is specially designed to work with the Worx GT Revolution CommandFeed, and give you a quicker and more efficient cut to help maintain a healthy, professionally groomed lawn. With the purchase of your Worx GT Revolution, you’re automatically enrolled in our Free Spools for Life program. You get free spools pre-loaded with 10 feet of line anytime you need them; just pay shipping and handling for each package of 6. (Order online)
If you decide to use traditional line, the Worx Revolution can accept standard 0.065” cutting line found at any garden or home center and can be wound around our empty spool cartridges. Refer to your owner’s manual for important details about how to wind the line on the spools and keep in mind that with conventional cutting line, CommandFeed may not work as expected.
The safety guard is an essential part of the tool. Not only does it keep you safe from any debris from the trimming/edging, it also helps regulate the length of the cutting line. Without the safety guard, your Worx GT Revolution will not operate properly and you are at risk for injury.
Carefully review the owner’s manual for all safety information and guidelines for using the Worx GT Revolution. Follow safety precautions while using any power tools – including wearing safety eyewear, gloves, appropriate shoes & clothing, and keeping hair tied back. See the owner’s manual for complete safety instructions and details.
If you decide the Worx GT Revolution isn’t the right tool for you, we offer a 30-day Money Back Guarantee from date of receipt (less shipping and handling). Please call our customer service center at 1-866-354-9679 (WORX) and we’ll be happy to assist. View more information here.
We know your tools are indispensable, so we cover each tool with a 2 Year Limited Consumer Warranty. You can extend your warranty to 3 years by registering online within 30 days of purchase. Already have your Revolution? Register now!
Parts subject to normal wear and tear are not covered by the tool’s warranty. View more information on our warranty here.
Lose a spool cap cover? Need an extra battery or charger? Many replacement parts are available online under Accessories.